Overview
The ARB Summit Winch Front Bumper, part 3480010, is a full-width powder-coated steel bumper for the 2021–2026 Ford Bronco. ARB designed it as a full bumper replacement with 4WD use in mind, and it is compatible with winches up to 10,000 lb.
The bumper provides off-road protection, twin jack points and rated recovery points, and it accommodates adaptive cruise control and parking sensors. ARB says its width blends into the vehicle and complements either wide or narrow fender flares.
ARB lists these winches as fitting: Warn ZEON 8, 8-S, 10, 10-S, ZEON Platinum 10 and 10-S, VR EVO 8, 8-S, 10 and 10-S, and Smittybilt Gen2 X20 10K. Fitment of the Warn M8000, XD9000, 9.5XP and 9.5XDC has not been confirmed.
Key features
- Full-width design built as a full bumper replacement
- Winch compatibility up to 10,000 lb
- Twin jack points
- Rated recovery points
- Accommodates adaptive cruise control and parking sensors
- Light mounts and a D-ring mount included
- Hoop included
Choosing and mounting a winch
A front winch bumper carries the winch, its control box and the recovery load, so the winch choice matters as much as the bumper. Match the winch capacity to the vehicle and the kind of recovery planned, and remember that a winch is only one part of the system. Rope or cable, a snatch block and rated recovery points all need to match the load.
Mounting a winch on a full bumper means checking clearance for the drum, fairlead and cable path. Keep the cable and remote control away from hot exhaust parts and sharp edges. After each recovery, inspect the cable for kinks and the bumper mounts for movement, and tighten any fasteners that have loosened.
- Match winch capacity to vehicle weight
- Check cable path and fairlead clearance
- Inspect cable and mounts after recoveries
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 3480010 |
| Position | Front |
| Width | Full |
| Material | Steel |
| Finish | Powder coat |
| Winch capacity | Up to 10,000 lb |
| Winch mount | Compatible |
| Light mounts | Included |
| D-ring mount | Included |
| Hoop | Included |
| Stinger | Not included |
| Jack points | Twin |
| Recovery points | Rated recovery points. Check the rating against your recovery gear before use. |
| Sensors | Accommodates adaptive cruise control and parking sensors |
| Fit style | Direct fit |
| Receiver hitch | Not included |
Vehicle fitment
It fits 2021–2026 Ford Bronco models.
Other Bronco model years and other models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Winch control boxes may need relocating, since the control box may not fit under the top pan press form. Plan the control box position before fitting the bumper.
As a full bumper replacement, the Summit takes the place of the factory front bumper. Plan the winch control box location before the bumper is fitted, since the control box is the part ARB flags for possible relocation.
What’s included
The bumper includes a hoop, light mounts and a D-ring mount. Not included: the winch, the stinger and the receiver hitch.














