Overview
The Addictive Desert Designs Bronco Stealth Fighter Rear Bumper, part number R230081370103, is a low-profile plate steel rear bumper for the 2021–2022 Ford Bronco. It stays tight to the rear of the vehicle and is designed to fit above and around the OEM hitch and trailer plug.
Two mounting points take rear-facing cube lights. An integrated license plate mount also retains the license plate light. Cutouts are made for the OEM parking sensors, and plugs are provided for Bronco models that have no sensors.
The bumper has clearance for up to a 37-inch spare tire, and a third brake light relocation bracket is included to accommodate the larger spare. Two reinforced clevis mounts for 3/4-inch D-rings provide recovery points when driving off-road.
The bumper is finished in powder coat and built in America. It is fully bolt-on.
Key features
- Low-profile plate steel rear bumper
- Two rear-facing cube light mounts
- Integrated license plate mount that retains the plate light
- Cutouts for OEM parking sensors, with plugs for models without sensors
- Designed to fit above and around the OEM hitch and trailer plug
- Clearance for up to a 37-inch spare tire
- Two reinforced clevis mounts for 3/4-inch D-rings
- Third brake light relocation bracket included
Spare tire and tailgate planning
A rear bumper changes how the vehicle carries its spare, so plan the spare tire before fitting. A larger tire adds weight and changes the swing and approach of the back end, which affects how the truck handles on steep trails. Check that the spare tire seats cleanly against the bracket and that the tire does not rub the bumper at full articulation.
The clevis mounts on the rear are useful for recovery, but they should be checked after each hard recovery. Look at the welds, the mounting bolts and the powder coat around the mounts. Chips in the coating near the bumper edge can start rust, so touch them up promptly. Keep the trailer plug accessible and check the wiring plug after rough use.
- Tighten spare carrier hardware after the first trip
- Inspect the license plate light wiring for chafing
- Clean mud from the sensor cutouts before backing up
Specifications
| Brand | Addictive Desert Designs |
|---|---|
| Part number | |
| Product type | Rear bumper |
| Material | Plate steel |
| Finish | Powder coat |
| Position | Rear |
| Cube lights | Two rear-facing mounts |
| D-ring mount | Included: two clevis mounts for 3/4-inch D-rings |
| Spare tire clearance | Up to a 37-inch spare |
| Receiver hitch | Not included |
| Tire carrier | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2021–2022 Ford Bronco.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bumper is bolt-on, with cutouts for the OEM parking sensors. It fits around the OEM hitch and trailer plug, which stay in place.
What’s included
The bumper is described with its clevis mounts, the license plate mount and the third brake light relocation bracket for the larger spare tire.
Not included: The receiver hitch and the rear cube lights are not included with the bumper.
