Overview
The DV8 Offroad MTO (Made to Overland) Series front bumper, part FBBR-01, is a winch-ready, full-width steel front bumper for the 2021–2026 Ford Bronco. It is made from high-grade steel and finished in powder coat.
The MTO Series retains the factory sensors and has a 3-inch pod light mount on each side. Its mesh inserts can be painted, and a perforated aluminum accent plate sits in front of the light brackets.
The MTO Series is a winch-ready, full-width front bumper with a light mount on each side and an optional bull bar. It is made from high-grade steel with a powder coat finish. It has no hoop, stinger or receiver hitch.
The winch mounting point sits inside the bumper and is reached through two openings at the top. It can mount up to a 12,000 lb winch.
An optional bull bar can mount a 13-inch LED light bar to add lighting. If you do not run a winch, DV8 includes light brackets to mount a single row 20-inch light bar behind the perforated aluminum accent plate.
Key features
- Full-width, winch-ready front bumper
- Winch mount inside the bumper, reached through two top openings, up to 12,000 lb
- 3-inch pod light mount on each side
- Paintable mesh inserts
- Light brackets for a single row 20-inch light bar
- Optional bull bar for a 13-inch LED light bar
Before you winch
A winch adds weight and pulling force at the front of the vehicle, so the mounting point and the bumper structure should be inspected before every heavy recovery. Look for cracks around the welds and mounting holes, loose fasteners and any shifting of the winch base. A winch rated for the bumper’s mount is only part of the setup; the fairlead, the line and the recovery straps all need to match the load they will see.
Full-width steel bumpers are often paired with a skid plate, a recovery strap and a set of D-ring shackles. Because the winch mount sits inside the bumper, access through the top openings matters when routing cable and checking the mount. Plan the wiring for the light mounts before the winch goes in, so that the cable and the light harness do not compete for space.
- Re-check winch and bumper bolts after the first few recovery pulls
- Route the winch cable away from sharp edges and the light wiring
- Keep the winch line rated for the load and inspect it for fraying
Specifications
| Brand | DV8 Offroad |
|---|---|
| Part number | FBBR-01 |
| Position | Front |
| Width | Full |
| Material | High-grade steel |
| Finish | Powder coat |
| Winch mount | Compatible, up to 12,000 lb |
| Light mounts | Included; 3-inch pod mount on each side |
| Mesh inserts | Can be painted |
| Accent plate | Perforated aluminum, in front of the light brackets |
| D-ring mount | Included |
| Hoop | Not included |
| Stinger | Not included |
| Receiver hitch | Not included |
Vehicle fitment
It fits the 2021–2026 Ford Bronco.
Other Bronco model years are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The Adaptive Cruise Control sensor module must be relocated if the Bronco is equipped with ACC.
What’s included
The D-ring mount and the light brackets. Not included: the winch, the optional bull bar and the light bars.

























