Overview
The Addictive Desert Designs Bomber Front Bumper with Rigid Light Mounts, part number F230194130103, is a tight-fitting plate steel front bumper for the 2021–2022 Ford Bronco. It follows the body contours of the Bronco, and its center mounts are designed for Rigid 360 6-inch lights.
A satin black aluminum panel in the center frames three mounting points for Rigid 360 6-inch lights, which are also available with Baja Designs lighting. Satin black aluminum panels at each side frame the cube light mounts. The steel is finished in hammer black powder coat.
Compared with the factory bumper, the approach angle is better and the bumper provides higher clearance. The factory parking sensors are built into the bumper, and the tow hooks stay underneath it. Two heavily reinforced clevis mounts take 3/4-inch D-ring shackles.
The optional 3/16-inch vented aluminum skid plate offers more protection than the plastic factory skid plate. An Adaptive Cruise Control relocation bracket is available, which lets the adaptive cruise control feature keep working in full. The bumper is fully bolt-on and built in America.
Key features
- Plate steel construction with hammer black powder coat
- Three mounting points for Rigid 360 6-inch lights in the center
- Cube light mounts framed by satin black aluminum
- Two reinforced clevis mounts for 3/4-inch D-ring shackles
- Better approach angle and higher clearance than the factory bumper
- Factory parking sensors built into the design
- Optional 3/16-inch vented aluminum skid plate
- Adaptive Cruise Control relocation bracket available
Light mounts and trail gear
Light mounts shape how the front of the truck looks at night and how it handles weather and trail debris. Rigid 360 lights and their brackets add weight at the front, so mount them securely and check aim after rough drives. Cube lights sit close to the steel, so route their wiring away from hot or moving parts.
An aluminum skid plate adds protection under the front end, but mud and grit can hold moisture against it. Rinse it after off-road runs and look for cracks around the mounting holes. The adaptive cruise control bracket is a separate option, so decide on it before installation so the setup is planned as one job.
- Aim lights after installation
- Route wiring away from heat sources
- Rinse the skid plate after off-road trips
Specifications
| Brand | Addictive Desert Designs |
|---|---|
| Part number | |
| Product type | Front bumper |
| Material | Plate steel |
| Finish | Hammer black powder coat; satin black aluminum panels |
| Width | Full |
| Light mounts | Included: three center points for Rigid 360 6-inch lights, cube mounts on each side |
| D-ring mount | Included: two clevis mounts for 3/4-inch D-rings |
| Winch mount | Not compatible |
| Hoop | Not included |
| Stinger | Not included |
| Receiver hitch | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct-fit front bumper for the 2021–2022 Ford Bronco.
Model years after 2022 are not covered, and the Bronco Sport is not covered either. Make sure your truck’s year, model and trim match before ordering.
Installation notes
The bumper is bolt-on, and the parking sensors and tow hooks stay in place. The aluminum skid plate and relocation bracket are optional, sold as separate choices.
What’s included
The bumper comes with the center light mounts, the side cube light mounts, the clevis mounts and the powder coat finish.
Not included: The Rigid 360 6-inch lights, the optional aluminum skid plate and the Adaptive Cruise Control relocation bracket are not included with the bumper.
