Overview
The DV8 Offroad FS-15 Series winch-ready mid-width front bumper, part FBBR-02, is a powder-coated steel front bumper for the 2021–2026 Ford Bronco. DV8 says optional modular wings can turn it into a full-width bumper.
A winch of up to 12,000 lb can be mounted on top of the bumper. At the center, either a 20-inch dual row light bar or six pod lights can be mounted.
The light mount tabs on the bull bar can be oriented to mount a 13-inch light bar above or below the bull bar. Two recovery mounts take 3/4 inch D-rings.
The bumper works with the factory plastic and metal skid plates, and the factory parking sensors stay in place.
The mid-width bumper can be widened with the modular wings, sold as FBBR-02W, so the same front end can later be run at full width. Light bars can go above or below the bull bar, or in the center, depending on the lighting setup.
Key features
- Mid width, with optional modular wings for a full-width look
- Winch mount compatible, up to 12,000 lb on top of the bumper
- Center mount for a 20-inch dual row light bar or six pod lights
- Light mount tabs for a 13-inch light bar above or below the bull bar
- Two recovery mounts for 3/4 inch D-rings
- Retains the factory parking sensors
Choosing a winch and lights
A winch on a front bumper carries heavy loads, and it works best when the mounting points and the bumper are matched to the winch’s rated pull. Before buying a winch, confirm its weight and wiring needs against your battery and charging system. Electric winches draw a large current, so a properly fused wire run directly from the battery is standard practice.
Light bars are the other common addition. A light above the bull bar throws light farther down the trail, while a light below it can be better for close work and for keeping glare off the windshield. Mount lights so they clear the hood and do not block the radiator or cooling airflow. Route the wiring away from moving parts and hot surfaces.
Over time, bolts on a bumper can loosen from vibration and off-road impacts. Recheck the mounting hardware after the first few trail runs, and inspect welds and brackets periodically for cracks.
Specifications
| Brand | DV8 Offroad |
|---|---|
| Part number | FBBR-02 |
| Position | Front |
| Width | Mid |
| Material | Steel |
| Finish | Powder coat |
| Winch mount | Compatible, up to 12,000 lb |
| Light mounts | Included |
| D-ring mounts | Two recovery mounts for 3/4 inch D-rings |
| Skid plates | Compatible with OEM plastic and metal skid plates |
| Hoop | Not included |
| Stinger | Not included |
| Receiver hitch | Not included |
Vehicle fitment
It fits the 2021–2026 Ford Bronco.
Other Bronco model years and other Ford models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The factory parking sensors remain in use with this bumper. A winch of up to 12,000 lb mounts on top of the bumper.
What’s included
Light mounts and recovery mounts are included. Not included: the winch, the light bars, and the modular wings, which are optional add-ons for a full-width look.






















