Select your vehicle

Rancho RS5000 Series Shock Absorber – RS55006

Rancho

$65.88In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 9:00 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear RS5000 Series shock absorber for the 1995–2004 Toyota Tacoma
  • No lift, for stock height
  • Ten-stage velocity sensitive valving with a 16 mm rod and 35 mm piston
  • Part number RANRS55006

Description

Overview

The Rancho RS55006 is a rear RS5000 Series shock absorber for the 1995 through 2004 Toyota Tacoma, at no lift, meaning stock height.

The RS5000 line dates to 1985, when it was introduced for light trucks and sport utility vehicles. This unit has ten-stage velocity sensitive valving, a 5/8-inch piston rod with a 16 mm diameter, and a 1 3/8-inch piston with a 35 mm diameter. The design fits both stock and raised vehicles.

Key features

  • Rear position shock absorber
  • No lift, stock height
  • Ten-stage velocity sensitive valving
  • 5/8-inch (16 mm) diameter piston rod
  • 1 3/8-inch (35 mm) diameter piston
  • Fits 1995–2004 Tacoma models

Rear shock replacement tips

Rear shocks carry much of the load on a light truck, especially with a bed load or trailer. A shock with the right valving keeps the axle controlled over bumps and reduces bounce on washboard roads. When replacing one, compare the eye sizes and overall length with the old shock, since mounting style can differ between generations even within the same model name.

It is common to replace rear shocks in pairs so both sides damp the same way. Look for oil residue on the shock body, a clunk over bumps, or a truck that bounces after a dip. Check the rubber bushings in each eye, the spring perches and the bolts that hold the shock to the frame and axle. Tighten hardware to the figures in the service manual rather than guessing.

  • Compare eye sizes before buying
  • Check bushings in each eye
  • Inspect spring perches and bolts

Specifications

Brand Rancho
Part number RANRS55006
Series RS5000
Position Rear
Lift No lift
Charge Gas charged
Valving Ten-stage velocity sensitive
Piston rod 5/8-inch (16 mm)
Piston 1 3/8-inch (35 mm)
Boot Red protective boot, included

Vehicle fitment

It fits the 1995 through 2004 Toyota Tacoma.

The list does not include the Toyota Tundra or Tacoma model years after 2004. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

This is a no-lift rear shock, so it suits trucks at stock height. If the truck has a lift, confirm the shock’s length and mounting against the lifted setup before ordering.

What’s included

The shock comes with a red protective boot and is sold individually.

Fitment

VehicleYearsTrims
Toyota Tacoma1995–2004Base, DLX, Limited, Pre Runner, S-Runner, SR5

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is the RS55006 for a lifted Tacoma?

No. It is made at no lift, meaning stock height, so a lifted Tacoma needs a shock matched to its lift. Check the year and lift height before ordering.

Does the RS55006 fit a 2005 Tacoma?

No, the list covers 1995 through 2004 Tacoma models only, so a 2005 truck is not included. Confirm your model year before ordering this rear RS5000 shock.

What valving does the RS55006 use?

It uses ten-stage velocity sensitive valving. The valving is one of the main design features of the RS5000 Series, and it suits both on-road and off-road use.

Should both rear shocks be replaced together?

Replacing them in pairs keeps damping even on both sides of the axle. A new shock beside a worn one can make the truck pull to one side or ride unevenly over bumps.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon