Overview
The Trail Gear 303786-KIT is a replacement seal kit for double-ended hydraulic rams with a 2.25-inch bore and 1.125-inch rod. It includes all seals and piston wear bands for servicing a double-ended ram. This is a seal kit, not a mounting kit.
The kit is designed specifically for these ram dimensions. The rod bushing is not included.
Key features
- Includes all seals for the ram
- Includes piston wear bands
- Designed for 2.25″ bore x 1.125″ rod double-ended rams
- Described by Trail Gear as a high quality replacement seal kit
Rebuilding a double-ended ram
A double-ended ram uses the same piston and rod inside a cylinder, so the seals keep fluid on both sides of the piston. When seals wear, fluid bypasses the piston and the hydraulic assist becomes slow, soft or uneven. Rebuilding restores the seal, but only if the bore and rod are in good condition.
Inspect the bore for scoring, pitting or rust before reassembling, since a scored bore will wear new seals quickly. Check the rod surface for nicks, and examine the rod bushing for wear or play. Piston wear bands help keep the piston centered, so replace them with new parts rather than reusing worn ones.
Keep the work clean, since dirt on seals or in the cylinder causes early failure. Lubricate new seals with hydraulic fluid before fitting, and bleed the system after reinstalling the ram. Test the movement under light load before relying on it off road.
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 303786-KIT |
| Kit type | Replacement seal kit |
| Ram type | Double-ended hydro ram |
| Bore | 2.25″ |
| Rod | 1.125″ |
| Included | All seals, piston wear bands |
| Not included | Rod bushing |
| Fitment | Universal fit tag; sized for the rams above |
Vehicle fitment
Measure the bore and rod before ordering, because the kit is sized for 2.25-inch bore and 1.125-inch rod rams only.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rebuilding a hydraulic ram requires disassembly, so confirm the bore and rod match before opening it. Inspect the rod bushing while the ram is apart, since the kit does not include one.
What’s included
The kit includes all seals and piston wear bands.
Not included: rod bushing.









