Overview
The Trail Gear Elbow Fitting 130256-1-KIT is a Number 6 JIC elbow fitting used to attach high pressure ram hoses to a gear box.
Because it joins high pressure hoses, match its Number 6 JIC end to your hose and gear box before installing.
Key features
- Elbow fitting with a Number 6 JIC connection
- Designed to attach high pressure ram hoses to a gear box
- Trail Gear part number 130256-1-KIT
- Universal fit listed by the manufacturer
Plumbing a high pressure ram hose
Ram hoses carry hydraulic fluid under pressure to the steering ram, so every joint in that line matters. A JIC fitting seals with a flared cone meeting a matching seat rather than with a gasket, so the flare and seat must be clean, undamaged and matched in size and angle. Scratches or debris on the flare are a common reason a fitting leaks.
Tighten JIC fittings firmly by hand first, then snug them with a wrench until they seal. Overtightening can distort the flare or damage the seat, and that damage is not always visible. After the system is pressurized, check each joint for weeping fluid and re-check once the hose has settled.
- Keep flares clean and free of nicks
- Check the hose for abrasion near moving parts
- Recheck connections after the first pressurizing
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 130256-1-KIT |
| UPC | 70000621607 |
| Fitting type | Elbow fitting |
| Connection | Number 6 JIC |
| Application | Attaches high pressure ram hoses to gear box |
Vehicle fitment
It is universal fit. Confirm the hose ends and gear box port match before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Connect the elbow to the gear box port, then attach the high pressure ram hose to the Number 6 JIC end. Check every connection for leaks once the system is pressurized.
What’s included
Check the package contents against your installation before starting, including any hoses, fittings or seals you need.









