Select your vehicle

Trail Gear Dana 60 Hub – 144012-KIT

Trail Gear

Shop Trail Gear Axle Hub Assembly on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 1-ton unit hub for Dana 60 or 9in housings set up for unit hubs
  • Takes 30 or 35 spline axle shafts
  • 1/2-20 wheel studs, 6×5.5 bolt pattern, integrated roll pin
  • Part number 144012-KIT

Description

Overview

The Trail Gear 144012-KIT is a 1-ton unit hub for Dana 60 or 9in housings that are set up for unit hubs. It bolts directly onto that housing setup.

The hub takes a 30 or 35 spline axle shaft, uses 1/2-20 threaded wheel studs and a 6×5.5 wheel bolt pattern, and has an integrated roll pin that keeps the spindle nut from coming loose.

Key features

  • Accepts a 30 or 35 spline axle shaft
  • 1/2-20 threaded wheel studs
  • 6×5.5 wheel bolt pattern
  • Integrated roll pin prevents the spindle nut from loosening

Choosing a unit hub setup

A unit hub bolts directly to the axle housing and carries the wheel bearings in one piece, which simplifies service compared with a hub that uses separate bearings. Confirm that the housing is set up for unit hubs and that the axle shaft spline matches before ordering or installing. The wheel studs and bolt pattern should also match the wheels you plan to run.

The integrated roll pin locks the spindle nut in place, so check that the pin is seated and undamaged when the hub is assembled. Torque the spindle nut to the procedure in your service manual, and do not reuse a damaged nut. When the hub is off, inspect the axle seal and bearing for play, since a worn bearing shows up as wobble or noise at speed.

Specifications

Brand Trail Gear
Part number 144012-KIT
UPC 70000621463
Rating 1-ton
Housing Dana 60 or 9in housing set up for unit hubs
Axle shaft spline 30 or 35 spline
Wheel stud 1/2-20 threaded
Wheel bolt pattern 6×5.5
Spindle nut retention Integrated roll pin

Vehicle fitment

No vehicle years, makes or models are listed. The hub is sized for Dana 60 or 9in housings set up for unit hubs, so check your axle housing rather than a vehicle name.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Confirm the housing is set up for unit hubs before installing, because the hub is built for that setup.

What’s included

The unit hub with its integrated roll pin. Check the package contents against your installation before starting.

SKU: TGI144012-KIT Category:

Specification

Shipping weight 20.00 lbs
Package dimensions 10.00 × 10.00 × 10.00 in
brands

Questions & Answers

What is the Trail Gear 144012-KIT?

It is a 1-ton unit hub from Trail Gear, part number 144012-KIT, made for Dana 60 or 9in housings that are set up for unit hubs. Its UPC is 70000621463.

What axle shaft spline does it take?

The hub takes a 30 or 35 spline axle shaft, with 1/2-20 threaded wheel studs and a 6x5.5 wheel bolt pattern.

Will it fit my Jeep?

No vehicle years, makes or models are listed. The hub is for Dana 60 or 9in housings set up for unit hubs, so check your housing first. Confirm your vehicle's year, model and trim before ordering.

Should I replace the axle shaft when fitting a unit hub?

Inspect the shaft spline and the axle seal first. Replace the shaft if the spline is worn or twisted, and replace the seal when it leaks. Fitting a unit hub to a worn shaft can let the spindle nut work loose over time.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Trail Gear Axle Hub Assembly on Amazon