Overview
The Trail Gear steering column is 3 1/4 in. long and reuses existing Toyota steering linkage. It avoids buying a coupler and cutting and welding the steering shaft.
The column fits most brands of steering valves, called orbitals, that are commonly used in this application. No vehicle years or models are given.
Key features
- 3 1/4 in. long from flange base to shaft edge
- Works with existing Toyota steering linkage
- No coupler needed.
- Fits most brands of orbital steering valves
Reusing existing linkage
Reusing existing linkage can save time and cost, but it puts more weight on careful measurement. The column’s flange base and shaft edge need to line up with the valve and linkage so the steering turns without binding. Measure from flange to shaft before cutting anything, and compare that length with the original shaft.
Steering columns carry the driver’s input into the valve, so any play or misalignment shows up as slop or a hard spot. Check the joint for wear, confirm the shaft is supported, and turn the wheel lock to lock on jacks before driving. Orbital valves also need clean hydraulic routing to avoid overheating during slow, heavy steering.
- Check flange bolts for proper torque after assembly
- Look for binding at full lock before a trail trip
- Inspect the existing linkage for wear before reusing it
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 130297-1-KIT |
| UPC | 70000621405 |
| Length | 3 1/4 in., from the base of the flange to the outer edge of the shaft |
| Valve compatibility | Most brands of orbital steering valves |
Vehicle fitment
The column is intended for Toyota steering linkage, but no years, models or trims are named. Confirm fit for your vehicle’s year, model and trim before ordering, and check the flange and shaft layout against your linkage.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the column is meant to avoid a coupler, the steering shaft does not need to be cut and welded. Confirm the flange and shaft fit your steering valve before final assembly.
What’s included
One steering column, part number 130297-1-KIT.
Not included: the orbital steering valve, which the column is designed to fit.














