Overview
The Pro Comp 55700 is a pair of tubular adjustable rear upper control arms for the Jeep Wrangler LJ and TJ. The arms allow the rear pinion angle to be tuned, which matters when a CV rear drive shaft and transfer case tail shaft kit are used. They can be used with or without that kit. The position is rear upper, with part code EXP55700.
The arms are tubular and adjustable, and they fit the rear upper position. Adjustment sets the rear pinion angle. Confirm the fit for your vehicle’s year, model and trim before ordering.
Key features
- Tubular design
- Adjustable arms
- Rear pinion angle tuning, per the manufacturer
- Usable with or without a CV rear drive shaft and tail shaft kit
- Sold as a pair
- Direct-fit design for the listed Wrangler models
Pinion angle and driveline setup
Upper control arms set the axle’s pitch relative to the frame, which determines pinion angle. When a rear driveline is changed, a fixed upper arm can leave the pinion out of line with the transfer case output, which causes vibration. Adjustable arms let the setup be tuned to match the driveline in use.
Adjustment should be done with the vehicle at ride height and the drivetrain in its normal load position. Measure the pinion angle at both ends of the driveshaft, then set both arms evenly. Recheck the angles after any change to lift height or tire size, since those shift the geometry too.
- Measure pinion angle before making changes
- Set both sides to the same length
- Recheck driveline angles after the first drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 55700 |
| Listed part code | EXP55700 |
| UPC | 614901114805 |
| Position | Rear upper |
| Design | Tubular, adjustable |
| Sold as | Pair |
| Fitment type | Direct fit |
Vehicle fitment
The arms fit the 2004-2006 Jeep Wrangler (LJ) in the Unlimited and Unlimited Rubicon trims, and the 1997-2006 Jeep Wrangler (TJ) in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
Other Wrangler generations are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Adjusting the upper arms changes the pinion angle or the caster, so measure the angle before and after the change and set it to the drivetrain you are running. Recheck the driveline angles once the arms and any tail shaft kit are in place.
What’s included
The kit is a pair of tubular adjustable rear upper control arms. Confirm the bushings and mounting hardware are included before starting the install.











