Overview
The Trail Gear 30 inch Rock Assault axle limit strap, part number 111293-KIT, restricts axle travel so a shock cannot reach full extension and break. It is built from six layers of 1.75 inch nylon webbing with minimal stretch. It is universal fit, so the shock’s length sets the correct strap rather than the vehicle year, make or model.
Length is measured from the center of the mounting holes and is guaranteed accurate to +/- 1/4 inch. Trail Gear says to choose a strap that is 1 inch shorter than the shock.
Key features
- Six-layer 1.75 inch nylon webbing with minimal stretch
- 4130 heat-treated chromoly steel buckles, zinc-plated for corrosion resistance
- 1/2 inch mounting holes in each buckle
- Anti-abrasion clips in each buckle to reduce wear
- Length guaranteed to +/- 1/4 inch, measured from the center of the mounting holes
Care and maintenance
Nylon webbing is tough, but it responds to sun, grit and repeated flexing. Store the strap out of direct sunlight when it is off the vehicle, and wash off mud and salt with fresh water. Let it dry fully before packing it away so mildew does not start in the folds.
Metal buckles are the other wear point. Zinc-plated steel resists corrosion well in normal conditions, but scratches can expose bare metal over time. Inspect the buckle surfaces and clips each time the strap comes off, and keep the mounting holes free of debris so hardware seats properly.
- Rinse grit and salt after each trip
- Dry webbing completely before storage
- Inspect buckle surfaces for scratches
- Clean mounting holes before reinstalling
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 111293-KIT |
| UPC | 70000640916 |
| Length | 30 inch, measured from the center of the mounting holes, +/- 1/4 inch |
| Webbing | 1.75 inch nylon, 6 layers |
| Strength | 9,000 lb. test nylon |
| Buckles | 4130 heat-treated chromoly steel, zinc-plated |
| Mounting holes | 1/2 inch |
| Clips | Anti-abrasion clip in each buckle |
Vehicle fitment
It is universal fit, so no vehicle year, make or model is assigned. Choose the length by measuring the shock it will protect.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure your shock, then select the strap 1 inch shorter than that measurement. Each buckle has a 1/2 inch mounting hole, so confirm your hardware fits that hole before installing.
What’s included
One 30 inch limit strap with 4130 chromoly buckles and anti-abrasion clips installed in each buckle.




