Overview
The TeraFlex Rear Lower Flexarm Kit, part number 1415540, is an adjustable rear lower control arm kit from the Alpine Series for the Jeep Wrangler JK. It fits 2007 through 2018 models in 2- and 4-door form. Rear lower flexarms set pinion angle and help center the axle in the wheel well, which matters once a JK is lifted.
Alpine flexarms pair TeraFlex’s maintenance-free sport design with the length adjustment of its monster flexarms. Rubber bushings at both ends are factory style and aimed at daily ride comfort, and the premium black e-dipped coating resists corrosion. The arms articulate fully for off-road flex.
Key features
- Adjustable length for pinion and caster angles and axle position
- Factory-style rubber bushings at both ends for ride quality
- Forged threaded joints with an aluminum pinch collar to lock length
- Black e-dipped base coat with black powder coat finish
- Full range of movement for off-road articulation
Rear lower arm geometry
Rear lower arms control pinion angle more directly than most other links, so a lift often calls for a length change here. Set the pinion angle first, then check that the axle sits square in the wheel well. Driveshaft vibration at highway speed is a sign the pinion angle needs a closer look.
Because the arms work with the lower and upper links, replace or adjust them as a set when the axle position changes. Inspect bushings for splitting, check the forged joints for play, and keep the pinch collar fully seated after each adjustment. Mud and road salt can work into joints, so clean and inspect the threads whenever an arm is removed for service. A worn bushing that shifts under load changes the geometry and can make the tires wear unevenly.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1415540 |
| UPC | 843885034704 |
| Product line | Alpine Series flexarm |
| Position | Rear lower |
| Tube | 1-5/8 inch x 0.156 inch wall, DOM steel |
| Joints | Forged threaded |
| Finish | Black powder coat over e-dipped coating |
| Quantity | Pair |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK) in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, including Unlimited versions of those trims. Confirm the model year and trim against your vehicle before ordering.
It does not fit the 1997–2006 Wrangler (TJ) or the 2004–2006 Wrangler (LJ). Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Adjust the length to your target pinion and caster angles, then tighten the aluminum pinch collar to lock the joint. Align the vehicle after installation and check driveline angles once the lift and arm lengths are set.
What’s included
One rear lower flexarm kit, supplied as a pair.









