Overview
The TeraFlex Front Upper Flexarm Kit, part number 1415520, is a pair of adjustable front upper flexarms from the Alpine Series for 2007–2016 Jeep Wrangler JK 2- and 4-door models. Flexarms are control arms that set pinion and caster angles and re-center the axle in the wheel well, so the upper arms matter once a JK is lifted or realigned.
Alpine flexarms combine the maintenance-free joints of TeraFlex sport flexarms with the full length adjustment of its monster flexarms. Factory-style rubber bushings at both ends damp vibration for daily driving, and the arms allow full range of movement for articulation off-road.
Key features
- Adjustable length for pinion and caster angle correction and axle centering
- Factory-style rubber bushings at both ends for vibration damping and ride quality
- Forged threaded joints with an aluminum pinch collar that locks the adjustable joint once length is set
- Premium black e-dipped coating under a black powder coat finish for corrosion resistance
- Full range of movement for off-road articulation
Upper arm setup and wear
Upper control arms carry braking and steering loads through the axle, so their joints matter as much as the lower arms. A lifted JK often needs a new upper arm setting after a lower arm change, because the pinion angle relationship shifts. Plan the upper and lower lengths together, then set the joints in a steady sequence rather than locking each arm one at a time.
Worn bushings show up as clunking over bumps, a loose feel at the steering wheel, or uneven tire wear. Check the pinch collar, threaded joints and rubber bushings at both ends every time the axle is serviced. Replacing a bushing or joint before it fails is usually simpler than correcting an alignment that has drifted under a damaged arm.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1415520 |
| UPC | 843885035275 |
| Product line | Alpine Series flexarm |
| Position | Front upper |
| Tube | 1-5/8 inch x 0.156 inch wall, DOM steel |
| Joints | Forged threaded |
| Finish | Black powder coat over premium black e-dipped coating |
| Quantity | Pair |
Vehicle fitment
The manufacturer fitment list covers the 2007–2016 Jeep Wrangler (JK) in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, including the Unlimited versions of those trims.
This arm does not fit the 1997–2006 Wrangler (TJ) or the 2004–2006 Wrangler (LJ). Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Set the arm to the length your pinion and caster angles need before tightening the aluminum pinch collar, since the collar locks the adjustable joint in position. Get an alignment after installation and check driveline angles if the pinion angle has changed.
What’s included
Two front upper flexarms, supplied as a pair.









