Overview
The ICON V.S. 2.5 Series PBR Shock Absorber Set, part number ICO27725CP, is a rear shock set for 2007-2018 Jeep Wrangler JK models in two-door and four-door layouts. It includes the ICON CDC valve, which is externally adjustable and offers 10 levels of compression damping force.
The CDC valve restricts oil flow into the reservoir, and that restriction sets how much compression damping the shock gives. The bump zone formed by the billet aluminum manifold adds about 20% more damping force near full compression. Like the rest of the 2.5 Series, the shock is configured for the application and can be rebuilt and revalved.
The CDC valve on this set is externally adjustable. It restricts oil flow into the reservoir, and that restriction creates the compression damping force. ICON describes 10 levels of compression damping force ranges, so the owner can set the rear damping to suit the trail or the road. The bump zone adds about 20% more damping force near full compression.
The set fits the two-door and four-door Wrangler JK across several trim names. The CDC valve changes the feel of the rear shocks, so confirm the trim and year before ordering a set for a Wrangler.
Key features
- Externally adjustable CDC valve with 10 compression damping levels.
- Valve restricts oil flow into the reservoir, which sets the damping force.
- Bump zone with about 20% extra damping force.
- Configured for the application in length and damping tune.
- Rebuildable and revalveable.
Setting compression damping
Compression damping controls how quickly the shock resists being pushed in, which affects how the rear end absorbs trail hits and how it settles after a bump. A stiffer setting keeps body motion down on pavement and under load, while a softer setting lets the axle follow rough ground more freely. Adjust in small steps and test on a route you know, since a change at one end of the range can feel large.
An externally adjustable valve is convenient, but it works within the limits of the shock’s valving and the springs under the truck. Changing the rear springs, bump stops or tires alters the load the damping sees, so the setting that suited the old setup may need revisiting. Keep notes on each setting so you can return to one that worked.
Inspect the valve body and its seals during routine checks. Look for oil weeping around the adjuster, stiff or loose turning, and uneven rear motion from one side to the other. Those signs suggest the valve needs service or a rebuild, which the shock’s rebuildable design allows.
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO27725CP |
| Shock series | V.S. 2.5 Series PBR |
| Position | Rear |
| Valve | CDC, 10 compression levels |
| Bump zone damping increase | About 20% |
| Fitment type | Direct fit |
Vehicle fitment
Fitment covers the 2007-2018 Jeep Wrangler JK in its two-door and four-door versions, across the trim levels named. Wrangler JL and Gladiator models are not covered.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A rear shock set with the CDC valve. Confirm the mounting hardware against your installation before starting.