Overview
The TeraFlex 1156300 is a 3 inch suspension lift kit with full flex upper and lower control arms for four-door Jeep Wrangler JK models. It fits all JK Wranglers, including Rubicon and Unlimited models.
The system includes a 3 inch lift, lower FlexArms and upper FlexArms, front sway bar disconnects, rear sway bar links, a rear track bar bracket, bump stops and all necessary hardware. It allows a tire of up to 35 inches, with aftermarket wheels of 4.5 inch backspacing or less.
The short details give a maximum tire size of 35×12.50 and list shocks as not included.
Key features
- 3 inch lift
- Full flex upper and lower control arms
- Front sway bar disconnects
- Rear sway bar links and rear track bar bracket
- Bump stops and all necessary hardware
- Max tire size 35×12.50
Control arms and alignment
Full flex control arms change how the axles move, which is one of the main reasons the geometry needs checking after installation. Articulation depends on arm length, mount angle and bushing condition, and those factors also affect steering and tire wear. A four-door body adds weight and wheelbase length, so it is worth testing the setup with a careful drive before a long trip.
Because shocks are not included, new shocks should be chosen with the control arm travel and ride height in mind. Check that the shock eyes clear the frame and arms at full extension. Bushings in control arms wear over time, so inspect them at regular service intervals and replace any that show cracking or looseness. Bump stops and sway bar links should be checked at the same time.
- Check alignment after the first few drives
- Inspect control arm bushings at each service
- Verify shock clearance at full extension
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1156300 |
| UPC | 843885020134 |
| Lift | 3 inch |
| Lift height range | 3 to 4.99 inches |
| Control arms | Full flex upper and lower |
| Body style | Four-door models |
| Max tire size | 35×12.50 |
| Shocks | Not included |
Vehicle fitment
It fits all Jeep Wrangler JK models, including Rubicon and Unlimited. The JK generation covers the 2007–2018 Wrangler.
It fits four-door models. Two-door Wranglers and models outside the JK generation fall outside this fitment. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The full flex control arms change the front and rear suspension geometry, so check the alignment, the driveline angles and the shock length after installation. Shocks are not included.
What’s included
The kit includes a 3 inch lift, lower and upper FlexArms, front sway bar disconnects, rear sway bar links, a rear track bar bracket, bump stops and all necessary hardware.
Not included: Shocks.








