Overview
The Rock Krawler LJ35XFSA-TT is a 3.5-inch X Factor short arm lift kit with twin tube shocks for the 2004 to 2006 Jeep Wrangler LJ Unlimited and Unlimited Rubicon, and for the 2005 Wrangler TJ Rubicon. Rock Krawler designs and fabricates its lift kits and suspension components for the Jeep Wrangler, and the X-Factor line fits Jeeps from the TJ to the Gladiator JT. The kit uses RRD Spec twin tube shocks and a coil spring setup at the rear.
This is not a complete drop-in system. It requires a transfer case drop kit, a CV driveshaft conversion, or a SYE with CV driveshaft conversion. A 2003 TJ with a four-speed automatic needs its factory automatic transmission skid plate removed, if fitted, so the front driveshaft has room to travel.
Key features
- 3.5-inch lift from the X Factor short arm design
- RRD Spec twin tube shocks
- Rear coil spring setup
- Requires a transfer case drop or CV driveshaft conversion
- Typical wheel fit for a 12.5-inch-wide tire is 15×8 with 3-3/4 inches of backspacing.
Before you buy
Lift height changes the angle of the driveshafts, and that is why a lift of this size usually needs a driveline solution. Check the transfer case position, the front driveshaft length and the CV joint angles before buying. Plan the rest of the front end as a system, since steering components and brake lines can be stretched when the axle moves further from the frame.
Shock and spring changes also affect how the vehicle feels on pavement. Twin tube shocks are a simpler design than remote reservoir units, so they suit moderate trail use and daily driving. Inspect bushings, sway bar links and ball joints when the lift goes in, and replace any that are worn so the new geometry is not working against old parts.
- Check driveshaft angles after the lift is installed
- Inspect ball joints and tie rod ends during install
- Replace worn sway bar links in the same job
- Recheck lug nut torque after the first drives
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RKSLJ35XFSA-TT |
| Lift size | 3.5 inches, per the product name |
| Shocks | RRD Spec twin tube |
| Rear lift component | Coil spring |
| Typical wheel fit | 15×8 with 3-3/4 inches of backspacing for a 12.5-inch-wide tire |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2004 to 2006 Jeep Wrangler LJ Unlimited and Unlimited Rubicon models, and 2005 Jeep Wrangler TJ Rubicon models.
A 2003 TJ with a four-speed automatic needs its factory automatic transmission skid plate removed, if fitted. Verify the year, model and drivetrain on your vehicle before purchase.
Installation notes
Installing it requires a transfer case drop, a CV driveshaft conversion or a SYE with CV conversion. Long arm geometry changes the alignment, so the front end should be aligned after installation.
What’s included
The kit includes the RRD Spec twin tube shocks and the rear coil springs. Check the parts received against your installation before starting.




