Overview
The TeraFlex 2032000 is the 2.5-inch Alpine RT2 short arm suspension system for the 2020–2026 Jeep Gladiator (JT) in the 80th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport trims. It is built around the Alpine IR short control arms, which are adjustable, and it uses coil springs at the rear for lift.
The Alpine RT systems build on the Alpine CT systems and include a full set of components. IR bushings remove bind through full travel, reducing bushing load during articulation. The design restores front and rear roll axis angles, which reduces brake dive and acceleration squat, and it lowers noise, vibration and harshness compared with other kits. The front SpeedBump bump stops are included to cushion hard hits on the trail.
Key features
- Adjustable Alpine IR short control arms
- IR (Independent Rotation) bushings that remove bind through full travel.
- Front SpeedBump bump stops included
- HD forged adjustable front track bar
- Front and rear track bar brackets that center the axles.
Alignment after a short arm lift
Short control arms change the caster, pinion and rear anti-squat angles, so the alignment should be set after the new arms are in place. Adjustable arms let the installer tune these angles to the lift height and the tires being run. Caster affects steering return and highway stability, while pinion and anti-squat settings affect driveline vibration and how the rear squats under acceleration.
Bushings and joints wear over time, especially on trail use. Look for play at the arm ends, squeaks at the mounts and uneven front tire wear. Check bump stop contact at full compression and recheck the track bar bolts after the first few drives. Inspect the shocks at the same time, because the new ride height changes their working range.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 2032000 |
| Type | Short arm suspension system |
| Lift | 2.5 inches |
| Lift height range | 0 to 3.5 inches |
| Rear lift component | Coil springs |
| Shocks | Not included |
| Tire size | 35 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2020–2026 Jeep Gladiator JT in the trims named above.
The list does not cover the Wrangler JL or JK or the Gladiator from 2019 or 2023 onward. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The control arms change the caster, pinion and rear anti-squat angles, so the alignment and driveline angles should be set after installation. Shocks are not included, so plan for shocks that suit the new ride height.
What’s included
Alpine IR short control arms, IR bushings, front SpeedBump bump stops, the HD forged adjustable front track bar, track bar brackets and coil springs.
Not included: Shocks.









