Overview
The TeraFlex 1156400 is a 4 inch suspension system for four-door Jeep Wrangler JK models. It allows the use of tires up to 37 inches and is built for serious trail use as a complete system.
The system includes four extended length coils, upper and lower FlexArms for both the front and the rear, front sway bar disconnects, a rear track bar bracket, bump stops and all necessary hardware. TeraFlex recommends aftermarket wheels with 4.5 inch backspacing or less for the 37 inch tire.
Shocks are not included with this kit. Driveline modifications are required with the system, so check the driveshaft and driveline angles before installation.
Key features
- 4 inch lift with extended length coils
- Upper and lower FlexArms at the front and rear
- Front sway bar disconnects
- Rear track bar bracket
- Bump stops and all necessary hardware
- Up to 37 inch tires
Full flex and driveline work
Full flex upper and lower control arms let the axles articulate and change the front and rear geometry, which is why alignment is part of the job rather than an afterthought. Four extended length coils raise the body, and the new ride height affects how steering and brakes feel, so a careful road test after installation is worth the time.
Driveline work is usually the first thing to plan around. A higher ride steepens the driveshaft angles, and the resulting vibration can accelerate wear on the joints and the pinion. Measuring the angles at full droop and planning any shaft modifications before the first trail run keeps the system dependable. Shock length should be checked at the same time as the geometry.
- Measure driveline angles before the first trail run
- Check alignment after installation
- Confirm shock length against the new ride height
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1156400 |
| UPC | 843885020189 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Short arm, with full flex upper and lower control arms |
| Rear lift method | Coil springs |
| Body style | Four-door models |
| Max tire size | 37×12.50 |
| Shocks | Not included |
Vehicle fitment
It fits JK Wrangler, Rubicon and Unlimited models. The JK chassis covers the 2007–2018 Wrangler generation.
The short details specify four-door models, so two-door Wranglers are not covered by this configuration. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Driveline modifications are required with this system, and the full flex control arms change the front and rear geometry. Check the driveshaft, the alignment and the shock length after installation.
What’s included
The kit includes four extended length coils, upper and lower FlexArms for the front and rear, front sway bar disconnects, a rear track bar bracket, bump stops and all necessary hardware.
Not included: Shocks.









