Overview
The Pro Comp Suspension K5091B is a 2 in. suspension lift kit for 2015–2017 Toyota Hilux and Vigo four-wheel-drive trucks. The kit raises the front with 50mm coil springs and the rear with leaf springs, which adds ride height and ground clearance over the stock suspension.
This kit is suited to both gas and diesel engines. Shock absorbers are not included, so choose shocks that suit the new ride height.
Key features
- 2 in. lift height for the front and rear suspension
- 50mm coil springs at the front
- Leaf springs at the rear
- Designed for four-wheel-drive trucks
- Suits both gas and diesel engines
Choosing shocks for a lift
Shock absorbers do much of the work of controlling a lifted truck, so their choice matters as much as the springs. When ride height rises, the shock’s mounting angle and travel change, and a shock sized for the stock setup can run at a steep angle or bottom out on rough ground. Look for shocks designed for the new height and for the way you drive, whether mostly on pavement or on trails.
Front and rear coil and leaf setups also move at different rates, so the shock choice affects how evenly the truck settles. Many owners replace shocks at the same time as the springs to keep the ride consistent. Brake hoses and sway bar links may need a look after the lift, since the geometry at each corner has changed.
- Match shock length and travel to the new ride height
- Replace shocks in pairs at each axle
- Check brake lines and sway bar links after lifting
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5091B |
| UPC | 700007944491 |
| Lift height | 2 in. |
| Front springs | 50mm coil springs |
| Rear springs | Leaf springs |
| Shock absorbers | Not included |
| Drivetrain | 4 Wheel Drive |
| Engine types | Gas and diesel |
| Listed vehicles | 2015–2017 Toyota Hilux and Vigo |
Vehicle fitment
It is intended for the 2015–2017 Toyota Hilux and Vigo. Make sure your truck’s year, model and trim match before you order.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Raising the front and rear changes suspension geometry, so have the alignment checked and the driveline angles measured after the lift is installed.
What’s included
The kit includes 50mm front coil springs and rear leaf springs.
Not included: shock absorbers.









