Overview
The Rigid Industries Ignite LED Spot Light Motorcycle Kit (part 20731, surface mount, black) is a pair of compact spot lights with a high and low setting, built for motorcycles. Each Ignite light packs 1000 raw lumens into a housing that measures 1.4 x 1.4 x 2 inches and weighs less than 4 ounces. Rigid says each light draws about 1 amp at full power.
The kit is meant for touring bikes, cruisers, dirt bikes and other bikes that need added forward light. Rigid offers the Ignite in spot and flood beam patterns, and this kit is the spot version. Because the lights mount with a GoPro style bracket, they can be placed in many locations on the bike.
Key features
- Spot beam pattern for the Ignite motorcycle kit
- High and low settings on the motorcycle kit
- GoPro style mounting bracket that fits many GoPro mounts, sold separately
- Low minimum voltage of 6 VDC, operating up to 28 VDC
- IP68 compliant housing
- Sealed control switch included for permanent mounting
Motorcycle mounting and wiring
Auxiliary lights on a motorcycle face wind, rain, road grit and constant vibration, so the mounting spot matters. Choose a place where the light sits above the front wheel line for a clear forward view, and where the bracket has solid attachment. Keep the lights clear of the handlebar sweep, the front brake lines and any cable that could catch when the bars turn.
Wiring should be neat and protected. Run the harness along the frame, secure it with clips, and keep splices sealed against moisture. The sealed control switch lets the lights be run from one place on the bars, so the rider can turn them on and off without reaching. Check the connections periodically, since vibration can loosen terminals over time.
- Mount above the front wheel line for a clear view
- Keep lights clear of handlebar sweep and brake lines
- Seal all splices against moisture
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 20731 |
| UPC | 849774015014 |
| Light type | LED, round lens, surface mount |
| Beam pattern | Spot |
| Output | 1000 raw lumens per light |
| Voltage | 6-28 VDC |
| Current | Less than 1 amp per light at full power |
| Size | 1.4 x 1.4 x 2 inches |
| Weight | Less than 4 ounces per light |
| Finish | Black |
| Ratings | IP68 compliant |
| Modes | High and low |
Vehicle fitment
This kit is designed for touring bikes, cruisers and dirt bikes. The GoPro style bracket allows placement in many locations on the bike. Confirm the bracket, mounting location and wiring route for your motorcycle’s year, model and trim before drilling.
Installation notes
The kit includes a wiring harness and a sealed control switch so the lights can be wired for permanent mounting. Use a fused connection and check local rules for auxiliary lights before riding on public roads.
What’s included
A pair of Ignite spot lights, mounting brackets, related hardware, a wiring harness and a sealed control switch with high and low settings.




























