Overview
The E2-Series LED Light Bar is a 20-inch driving bar that uses patented Specter optics. The bar carries 60 white LEDs and draws 162 watts, and it is sold as a single driving light.
The E2-Series starts instantly, has over and under voltage protection and integrated thermal management. The housing includes a durable polycarbonate lens and a GORE pressure equalizing vent, and the LED lifespan is 50,000 hours. The bar is RoHS compliant and engineered and assembled in the USA.
Key features
- Patented Specter optics
- 60 white LEDs
- 162 watts
- 50,000-hour LED lifespan
- Instant on and off, with no warm-up
- Over and under voltage protection
- GORE pressure equalizing vent and durable polycarbonate lens
Wiring a high-draw driving bar
A driving bar with this kind of draw belongs on a relay with a fuse close to the battery, so the switch carries only a small signal. Heavy cable should be sized for the full load and routed away from sharp edges, moving linkages and hot engine parts. Solid, clean ground connections matter as much as the feed, since a poor ground can dim the bar and heat up the circuit.
Thermal management helps the LEDs keep their output over time, but the housing still needs air to move. Keep the vent free of mud, wax and paint, and inspect the lens seal after deep water crossings or pressure washing. A bar that flickers or dims during use often points to a wiring or ground problem rather than a failed LED.
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774028991 |
| Series | E2-Series |
| Light type | LED light bar, sold as a single bar |
| Length | 20 inch |
| LED count | 60 white LEDs |
| Power | 162 watts |
| Beam pattern | Driving, Specter optics |
| Lens color | Clear |
| Lens material | Durable polycarbonate |
| Rated life | 50,000 hours |
| Mounting | Bracket |
Vehicle fitment
This bar is a universal fit, not a model-specific part. The bracket lets the owner place the 20-inch bar on the bumper, bar or frame, and that placement is planned for each vehicle.
Installation notes
Because the bar draws 162 watts, wire it through a relay and a fused circuit sized for that load. Keep the cable away from heat and moving parts, and check local rules on driving lights before using the bar on a road vehicle.
What’s included
The package is one 20-inch light bar. Confirm the wiring and bracket needs against your installation before starting.









