Overview
The Rigid Industries D-Series Midnight Optic Spot Light is a square spot light with a black enamel finish, sold as a pair. Its hybrid spot optic has a transparent black enamel coating that gives the light a blacked-out look, and it uses four white LEDs in each housing.
The Midnight Optic design is meant to make the light less noticeable when it is not running, because the blacked-out finish blends into the vehicle during daylight. It delivers strong LED output for night use. The housing is surface mounted on a bracket, and the hardware is black oxide.
Key features
- Hybrid spot optic
- Transparent black enamel coating over the optic
- Four white LEDs per light
- Black oxide hardware
- Square black housing
- Sold as a pair
Aiming a spot light
A spot pattern concentrates light into a narrow, focused beam, so aim is more important than with a flood. Set the lights with the vehicle on level ground and a helper at the front, then check the beam on a dark road or track. Small changes in angle move the hot spot a long way down the trail.
Pairs are easier to match when both lights are set at the same height and angle. Mark the bracket position before tightening, and recheck after the first few drives since vibration can change the aim. Keep the optic clear of dirt, as a dull coating or film scatters the beam.
- Level the vehicle before setting the aim
- Mark bracket positions before tightening
- Recheck aim after rough trails
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774028465 |
| Series | D-Series Midnight Optic |
| Light type | LED spot light, sold as a pair |
| Light shape | Square, 3 inches |
| Beam pattern | Spot |
| LED count | 4 white LEDs per light |
| Mounting | Surface, bracket |
| Finish | Black enamel |
| Hardware | Black oxide |
Vehicle fitment
It is a universal fit and is not built for one vehicle. The bracket mount lets the owner pick the surface and aim, which matters for a spot pattern. Verify the year, model and trim of your vehicle before purchase.
Installation notes
Fasten the bracket to a solid surface, then aim the spot pattern at the area you need. Wire the pair through a fused circuit and route the cable clear of moving parts. Check local rules on driving lights before using them on a road vehicle.
What’s included
The pair of spot lights is the whole package. Check the package contents against your installation before starting.









