Overview
The Rigid Industries D-XL PRO Driving Diffused LED Light Pods, part number 322713, are diffused driving pods in a 4-by-4-inch housing. Rigid designed the D-XL line for owners who needed a larger light than the original D-Series, and the pods keep the same compact-light approach in a bigger body.
The D-XL PRO uses a professional race output with up to 170 percent more raw lumens while keeping the efficiency of the wider product line. The pods have an unbreakable polycarbonate lens and a UV-resistant polyester powder coat. The line is intended for off-road, power sports, automotive, mining, agriculture and fire and rescue use.
Key features
- Diffused driving beam
- 4-by-4-inch housing
- Up to 170 percent more raw lumens than before.
- Unbreakable polycarbonate lens
- UV-resistant polyester powder coat
- Stainless steel hardware and a vibration isolator
Running a pod pair
Running two pods side by side gives a wider and more even field of light than a single unit, but the pair needs matching aim and a clean electrical layout. Set both pods to the same angle so the light patterns overlap at the distance you expect to drive. Mount them at the same height, since a small difference can make one pod look brighter or leave a dim band across the trail.
The wiring should be planned as one system. Give each pod a clean, short run from a common fused source, and use connectors that seal against water. Pairs that flicker usually point to a loose connection or a poor ground, so check those first. Keep the cable clear of moving suspension parts and hot exhaust components.
- Match the aim and height of both pods
- Keep cable runs short and clear of moving parts
- Check ground points first if the pair flickers
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | RIG322713 |
| Series | D-XL PRO |
| Light type | LED light pod |
| Housing size | 4 by 4 inches |
| Lens material | Unbreakable polycarbonate |
| Finish | UV-resistant polyester powder coat |
| Hardware | Stainless steel |
| Beam pattern | Diffused, with other optics available. |
Vehicle fitment
These D-XL PRO pods are a universal fit and are not made for one vehicle. Mounting space for a 4-by-4-inch pod varies between vehicles, so check the bracket and cable route before fitting.
Installation notes
Keep the vibration isolator and stainless hardware in place when mounting the pods. Use a fused circuit and check local rules on driving lights before using them on a road vehicle.
What’s included
The item is a single diffused driving pod. Check the package for a wiring harness before fitting.









