Overview
The Skyjacker 38X234X3 is a U-bolt kit, part number 38X234X3, for clamping an axle to its leaf springs. Four U-bolts come with eight Nylock tall nuts and eight thick flat washers in one kit.
This kit is not tied to a particular vehicle, so it suits buyers who have already confirmed their axle and spring setup.
Key features
- Four U-bolts
- Eight Nylock tall nuts
- Eight thick flat washers
- Sold as a single kit
Pre-install checklist
A short check before the job saves time and avoids a loose clamp. Confirm the axle tube diameter and the spring pack thickness, then lay out the bolts, nuts and washers to be sure the full set is present. Compare the leg length with the depth of the spring seat so the threads have room to engage.
Keep the seats clean and the threads free of grit. Worn spring pads or a cracked axle seat should be replaced before the new bolts go on, since they will not hold torque. Tighten the nuts evenly across the set, then retorque after the first short drives. Many owners find that a second check on rough roads prevents the clamp from working loose.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 38X234X3 |
| UPC | 803696213767 |
| Kit contents | Four U-Bolts, Eight Nylock Tall Nuts, Eight Thick Flat Washers |
| Sold as | Single |
Vehicle fitment
Fit depends on the U-bolt size matching your axle and spring setup. The universal fit designation does not confirm a match, so measure your axle tube and spring pack before buying.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Four U-bolts, eight Nylock tall nuts and eight thick flat washers.









