Overview
The Fabtech FTS1500UBK is a U-bolt kit that clamps an axle to its springs. It contains four U-bolts, eight Nylock tall nuts and eight thick flat washers, all under one part number.
Match the U-bolt measurements to your own axle and spring pack before you order, because a kit only fits when those dimensions agree.
Checking clamp force over time
The U-bolts on a leaf spring axle work as a clamp, so their job is to hold the spring pack firmly against the axle housing. Over time, the spring leaves settle and the clamp can loosen, especially after rough off-road use. A clamp that has lost tension may rattle, shift or wear the seats on the spring and axle.
Periodic inspection helps catch problems early. Look at the threads for stretching, check the nut faces and plates for wear, and make sure the U-bolts sit square on the spring. Tighten the nuts evenly in a cross pattern, and re-check them after the first few drives on new hardware. Lubricate threads only if your service manual calls for it.
- Re-torque after the first few drives
- Look for flattened or stretched threads
- Check plates for cracks or wear
- Replace worn hardware as a set
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS1500UBK |
| UPC | 67486600280 |
| Type | U-bolt kit |
| U-bolts | Four |
| Nylock tall nuts | Eight |
| Thick flat washers | Eight |
Vehicle fitment
No vehicle years are named for FTS1500UBK, and the direct fit label does not identify a model. Check the fit against your axle and spring specifications.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Listed contents: four U-bolts, eight Nylock tall nuts and eight thick flat washers.








