Overview
The Rubicon Express RE1225 is a U-bolt kit for the Chrysler 8.25 rear axle. It comes as a set of four U-bolts and nuts, sized at 3 inches wide and 9 inches tall with a 1/2-inch diameter rod.
It fits most Cherokees with a Chrysler 8.25 differential. Check the year, model and trim against your vehicle before ordering.
Key features
- Four U-bolts
- Eight hi-nuts
- Eight thick flat washers
- 1/2-inch diameter rod
- 3 inches wide by 9 inches tall
Spring pack and axle care
U-bolts hold the axle to the leaf springs, so their job is clamping force rather than structural strength. Over time the clamp can loosen, the spring pack can shift, and the threads can stretch. Inspecting the clamp area regularly catches these problems before the axle moves out of place on the springs.
When fitting new U-bolts, clean the threads, set the spring pack on its center mark, and tighten the nuts evenly in a crisscross pattern. Recheck the torque after the first few trail runs, since new hardware often settles. Look for cracks in the U-bolt bends and for rust around the nut seats.
- Use all four U-bolts together
- Tighten nuts evenly across the set
- Recheck after early use
- Replace bolts with stretched or damaged threads
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1225 |
| UPC | 614901437638 |
| Axle | Chrysler 8.25 rear |
| Rod diameter | 1/2 inch |
| Width | 3 inches |
| Height | 9 inches |
| Included | 4 U-bolts, 8 hi-nuts, 8 thick flat washers |
| Fitment | Universal fit |
Vehicle fitment
The kit is made for the Chrysler 8.25 rear axle and fits most Cherokees with that differential. Confirm your axle before ordering.
Confirm your vehicle’s year, model and trim before ordering, and check that your axle is a Chrysler 8.25 differential.






