Overview
California Super Trucks offers the CSU-D15-11R as a U-bolt kit for axle and spring mounting. The package holds four U-bolts with eight Nylock tall nuts and eight flat washers, all grouped under one part number.
Matching the axle and spring pack measurements to the clamp is the key check before buying this kit. Each U-bolt needs to fit the axle tube and pack thickness.
Before you choose a U-bolt kit
U-bolt kits are usually chosen by axle tube size and spring pack thickness, since the legs must wrap the tube and pass through the pack with the right spacing. Bolts that are too short leave the nut without enough thread, and bolts that are too long can bottom out before the clamp is tight. Measure before buying, then compare the measurements with the U-bolts currently on the vehicle.
Clamp hardware works best as a complete set. Replacing the nuts and washers at the same time as the U-bolts keeps the load even across the axle. After installation, recheck the torque once the clamp has settled and inspect for rust at the bends. Early attention to these points helps the axle stay located and quiet under load.
- Measure axle tube and spring pack thickness
- Check leg length against thread engagement
- Replace all four U-bolts together
- Inspect for rust at the bends each season
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSU-D15-11R |
| UPC | 70000540499 |
| Type | U-bolt kit |
| U-bolts | Four |
| Nylock tall nuts | Eight |
| Thick flat washers | Eight |
Vehicle fitment
Measure the axle and spring pack before choosing this kit, since the clamp only works when those dimensions match. Confirm the year, model and trim of your truck before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The contents are four U-bolts, eight Nylock tall nuts and eight thick flat washers, all packaged together.









