Overview
The Skyjacker UC2F is a U-bolt kit sold as a kit. It includes four U-bolts, eight Nylock tall nuts and eight thick flat washers, which covers the hardware for four clamp positions.
The kit contents are four U-bolts, eight Nylock tall nuts and eight thick flat washers. Size, shape and length should be confirmed against your spring and axle before ordering, since those decide the fit.
Key features
- Four U-bolts in the kit
- Eight Nylock tall nuts
- Eight thick flat washers
- Sold as a kit
Why clamp pressure matters
Clamp pressure holds the spring against the axle seat, and that pressure is what keeps the spring from shifting under load. When the U-bolts loosen, the spring can move out of position and wear the seat, the bushings and the axle pad. Keep the clamps tight and check them regularly, especially after the first few trips with a new suspension.
Washers and lock nuts both play a part in holding that pressure. A flat washer spreads the load across the spring plate, and a lock nut resists backing off from vibration. Always use fresh lock nuts when reinstalling clamps, since the locking feature wears after it has been used. Inspect the spring seats and axle pads for wear while the clamps are off, because worn surfaces need repair before the new kit goes on.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYUC2F |
| Product type | U-bolt kit |
| U-bolts | 4 |
| Nuts | 8 Nylock tall nuts |
| Washers | 8 thick flat washers |
| Sold as | Kit |
Vehicle fitment
Fit depends on the spring and axle the kit clamps, so compare your truck’s year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check each U-bolt against its spring and axle before tightening, then use the washers and Nylock nuts supplied. Tighten to the torque value for your vehicle.
What’s included
The kit includes four U-bolts, eight Nylock tall nuts and eight thick flat washers.








