Overview
The Pro Comp Suspension 50334 is a direct fit U-bolt kit that secures a leaf spring pack to the axle. New hi-nuts and extra thick washers are supplied with the U-bolts.
Key features
- Direct fit U-bolt kit
- New hi-nuts
- Extra thick washers
- Low-alloy high-strength steel
Thread length and hardware check
Before tightening, dry-fit each U-bolt with its washer and hi-nut so you can see how much thread projects past the nut. Too little thread means the nut cannot take the full clamp load, and too much can make the clamp feel tight without clamping correctly. Adjust the stack so the nut seats fully on the thread.
Extra thick washers spread the clamp load across the spring seat, which helps protect the spring pack at the contact points. Keep the washers flat against the plate and avoid stacking extra spacers. Recheck the hardware after the first few hundred miles, since the spring pack settles and the clamp can lose preload.
- Dry-fit before final tightening
- Keep washers flat and seated
- Recheck clamp after early driving
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 50334 |
| UPC | 614901503340 |
| Material | Low-alloy high-strength steel |
| Round style | Zinc plated |
| Square style | Unplated |
| Hardware | Hi-nuts and extra thick washers |
Vehicle fitment
This kit is a direct fit. Check your spring pack and axle before ordering to confirm it suits your setup. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the thread length on each U-bolt against the nut and washer stack before tightening, and recheck the hardware after the first few hundred miles of driving.
What’s included
U-bolts, hi-nuts and extra thick washers.








