Overview
The Fabtech FTS748 is a U-bolt kit for securing an axle to its springs. It is marketed as universal fit, so the match to a given axle housing has to be checked by measurement.
Compare part number FTS748 with UPC 674866022911 before assuming two kits are the same.
Key features
- Four U-bolts for axle securing
- Eight Nylock tall nuts
- Eight thick flat washers
- Sold as one kit
Measuring before you bolt on
Universal fit U-bolt kits are built to suit many axle housings, but each truck still needs a clamp that matches its own axle tube and spring pack. Measure the axle tube diameter and the distance between the spring seats, then confirm the U-bolt legs reach through the spring and plate with room left for the nuts. Clearance to brake lines and the driveshaft should be checked as well.
A clamp that is slightly off can still tighten, but it will not hold the axle firmly over time. Look for uneven pressure on the plates or a U-bolt that sits at an angle. Replacing worn or bent hardware as a set keeps the load even, and tightening in a cross pattern helps the spring stay seated. Re-check the nuts after the first few drives.
- Measure the axle tube and spring pack
- Check brake lines and driveshaft clearance
- Replace bent U-bolts as a set
- Tighten nuts evenly in a cross pattern
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS748 |
| UPC | 674866022911 |
| Included hardware | Four U-bolts and eight thick flat washers with eight Nylock tall nuts |
Vehicle fitment
No vehicle is confirmed for the FTS748. Universal fit means the kit is not sized for one application, so the axle and spring dimensions on your truck need to be compared first.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Four U-bolts, eight Nylock tall nuts and eight thick flat washers.









