Overview
The Skyjacker U-Bolt 916X3X712 is an axle U-bolt kit sold under Skyjacker part number 916X3X712. Each kit consists of four U-Bolts, eight Nylock tall nuts and eight thick flat washers, the clamping hardware used to secure an axle to its springs.
It is not tied to a particular vehicle, axle or spring dimensions. Confirm the fit before ordering.
Measuring before you buy
Before ordering U-bolts, measure the axle tube diameter and the thickness of the spring pack. The clamp needs to wrap the tube snugly and reach the spring perch without pinching the leaves. Mismatched sizes can leave the nuts with too little thread to hold, or force the bolt legs into a tight bend that weakens them over time.
Bring a tape or caliper to the job site and write down the numbers before shopping. Compare them with the bolt diameter and width, and note the thread length needed for the nuts to seat fully. If you are unsure, ask the installer or a local suspension shop to check the fit before the new clamps go on.
- Axle tube diameter
- Spring pack thickness
- Thread length needed for full nut engagement
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 916X3X712 |
| UPC | 803696115290 |
| Included hardware | Four U-Bolts, eight Nylock tall nuts, eight thick flat washers |
| Sold as | Single kit |
Vehicle fitment
Fitment is given as Universal Fit with no vehicle, axle or spring named. Because U-bolts are sized to a specific axle, this kit is not confirmed for any particular vehicle.
Fitment is not tied to any year, make, model or trim. Measure your axle and spring pack before ordering, and confirm your vehicle’s year, model and trim.
What’s included
Four U-Bolts, eight Nylock tall nuts and eight thick flat washers, sold together as one kit.






