Overview
The Skyjacker U-Bolt, part number SKY916X318X812, is an axle U-bolt supplied as a single piece. Skyjacker says its replacement U-bolts are E-coated for corrosion resistance and that each U-bolt comes with 2 nylon insert lock nuts.
Skyjacker’s U-bolt line covers many sizes and end shapes, including square, round and semi-round. Confirm the dimensions and end shape against your axle and spring setup before ordering.
Key features
- Replacement axle U-bolt
- E-coated for corrosion resistance
- Includes 2 nylon insert lock nuts
- Supplied as a single U-bolt
- Skyjacker’s U-bolt line covers square, round and semi-round end shapes
Axle U-bolt replacement basics
U-bolts clamp the axle housing to the leaf springs, so their condition directly affects how the axle sits under the truck. Bent threads, stretched ends or a loose clamp can let the axle shift, which shows up as wander or a clunk when braking hard.
When replacing U-bolts, match the axle tube diameter, thread size and end shape to the spring pack. Replace the lock nuts with new ones and inspect the spring seats for cracks or wear. Clean rust from the threads so the nuts can reach the proper torque.
After installation, drive at low speed and re-check the nut torque. Follow the torque and thread lubrication guidance that applies to your setup. Inspect the U-bolts at regular service intervals for rust, cracking or movement.
- Check the axle tube and spring pack match
- Use new lock nuts
- Inspect spring seats for cracks
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKY916X318X812 |
| Product type | Axle U-bolt |
| Coating | E-coat |
| Hardware | 2 nylon insert lock nuts |
| Quantity | Single |
| Fit type | Universal |
Vehicle fitment
The U-bolt must match the axle tube size and the spring pack width. Confirm those dimensions for your vehicle before ordering.
Confirm the thread and vehicle use for your axle and spring setup before ordering.
Installation notes
U-bolts hold the axle to the springs and affect control, so professional installation is recommended. Lift the vehicle with jack stands on level ground and avoid working beneath it on a jack alone. Torque the nuts evenly and re-check after the first drive. Once the work is done, have the alignment checked, and confirm that brake lines, cables and wiring are not pinched or stretched through suspension travel.
U-bolts clamp the axle to the spring pack, so tighten them evenly to the correct torque, and re-check the torque after the first miles of driving.
What’s included
One U-bolt with 2 nylon insert lock nuts.








