Overview
Skyjacker’s 58X318X912 is an axle U-bolt kit that secures an axle housing to leaf springs in one set. Its fitment is universal, so verify the U-bolt diameter and width against the components on your vehicle.
Keeping the axle clamped
The purpose of this kit is to keep the axle housing pressed against the leaf springs, so the clamp is one of the main load paths in the rear suspension. When it loosens, the spring can slip in its perch, the axle can rotate, and the driveline angles change. Those effects are easy to miss until a tire wears unevenly or a noise develops.
Routine checks help. After installation and again after several trips, look for gaps between the clamp and the housing, and check that the nuts have not backed off. Keep the spring shackles and bushings in mind too, because worn parts can allow movement that loads the clamp unevenly.
- Nut torque after the first trips
- Gaps between clamp and housing
- Spring perch wear
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 58X318X912 |
| UPC | 803696108803 |
| Sold as | Single |
Vehicle fitment
Universal fit means no make, model or year is attached, so fit depends on your axle and spring dimensions.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Four U-bolts come with eight Nylock tall nuts and eight thick flat washers in the kit.




