Overview
The Skyjacker 58X234X9 is a set of axle U-bolts used to hold an axle against leaf springs. Skyjacker labels it universal fit, so it is sold without a named make, model or year.
Measuring for a U-bolt fit
Measuring is the main step with any U-bolt set. Check the axle tube diameter, the spacing across the spring seat, and the thread length needed to clear the locating plate and nut. Take those readings on both sides of the axle to catch any difference. Universal sets fit many setups only when those dimensions line up, so a quick measurement saves time at installation.
Look at the existing U-bolts for stretch, rust, or a bend in the legs. A bent leg can prevent even clamping and let the axle shift. Install new nuts and washers with the kit, then tighten gradually in a cross pattern and recheck after the first drives.
- Measure the axle tube before fitting
- Compare spring seat spacing
- Check thread length against the plate
- Replace bent or rusted U-bolts
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 58X234X9 |
| UPC | 803696108582 |
| Sold as | Single |
Vehicle fitment
Vehicle matching is left to you: no make, model or year is attached to this kit. Measure your axle and spring setup against the bolt size.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The package holds eight thick flat washers, eight Nylock tall nuts and four U-bolts.







