Select your vehicle

Skyjacker U-Bolt – 58X4X10

Skyjacker

$35.61Usually ships within 5 to 6 days
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 7:30 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Replacement U-bolt sold as a single
  • E-coated finish
  • Two nylon insert lock nuts included
  • Part number SKY58X4X10

Description

Overview

The Skyjacker SKY58X4X10 is a replacement U-bolt sold as a single piece, finished with an E-coat for corrosion resistance. Two nylon insert lock nuts are included with the bolt.

These U-bolts are made in square, round and semi-round ends, and in lengths between 1.75 and 19 inches. The part number works as a catalog code, so measure the bolt being replaced and match its thread, diameter and bend length before fitting.

Key features

  • E-coated for corrosion resistance
  • Sold as a single U-bolt
  • Two nylon insert lock nuts supplied
  • Catalog part number SKY58X4X10 for ordering

Care and maintenance

Steel U-bolts usually rust from the inside of the threads outward, so the nut area is where trouble starts. Coat the exposed thread with a light anti-seize or corrosion inhibitor during installation, and wipe off any salt or mud after winter driving.

Torque loss is the other common problem. A clamp tightened on new bushings or fresh spring rubbers will settle, so re-check nut torque after the first few drives and again at each oil change.

Keep an eye on the legs of the U-bolt where they bend. Hairline cracks, flaking coating or bright rub marks on the axle are signs that the clamp is flexing too much and should be replaced rather than retightened.

  • Coat exposed threads at installation
  • Wipe salt and mud off after winter
  • Re-check torque after early drives
  • Replace bolts that show cracks at the bend

Specifications

Brand Skyjacker
Part number SKY58X4X10
Product type U-bolt
Finish E-coated
Included hardware 2 nylon insert lock nuts
Sold as Single

Vehicle fitment

Confirm fit for your vehicle’s year, model and trim before ordering. A U-bolt has to suit the spring and axle it clamps, so check the diameter and thread against them.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Thread the nuts onto the SKY58X4X10 by hand first, then tighten them evenly to the torque figure for your vehicle. Check that the U-bolt sits square on the spring or axle.

What’s included

One SKY58X4X10 U-bolt and two nylon insert lock nuts.

Questions & Answers

Which vehicles does the SKY58X4X10 U-bolt suit?

No specific vehicle is covered by this part. Confirm fit for your vehicle's year, model and trim before ordering, and match the diameter, thread and bend to the spring and axle.

Does the SKY58X4X10 come with lock nuts?

Yes. The bolt ships with two nylon insert lock nuts for the SKY58X4X10. It is sold as a single U-bolt, so order one for each clamp position on your spring or axle.

Is the SKY58X4X10 coated?

Yes. It has an E-coat for corrosion resistance, which helps protect the steel against road salt and moisture. The coating is meant to hold up on a spring or axle.

Should I replace U-bolts in pairs?

It is a good idea when one side shows rust, cracks or stretched threads, since the other clamp has usually seen the same wear. Replacing both keeps the load even across the spring or axle and avoids a repeat job soon after.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon