Overview
The Skyjacker 916X318X1012 is a U-bolt kit for axle clamping, from the brand’s axle U-bolt line. The set carries four U-bolts along with Nylock tall nuts and thick flat washers. Skyjacker classes it as universal fit, yet the clamp size has to suit your axle tube and mounting hardware, so verify that before fitting it.
Key features
- Four U-bolts in each set
- Eight Nylock tall nuts
- Eight thick flat washers
Clamping hardware and axle stability
The clamp is the link between the axle and spring, so even small looseness can be felt as wander or noise. A U-bolt set works with the spring pad and plates, and it has to hold the axle without bending or slipping. Off-road use adds shock and twist, which tests the clamp more than street use.
When assembling, use the thick washers and locking nuts in the arrangement provided, and keep threads free of mud and rust. Torque in stages, then recheck after a short run. If a bolt is bent, rust-pitted or the threads are damaged, replace the set rather than adding a stop-gap.
- Check for wander at highway speeds
- Inspect threads for corrosion
- Replace bent or pitted bolts
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 916X318X1012 |
| UPC | 803696168722 |
| Contents | Four U-bolts, eight Nylock tall nuts, eight thick flat washers |
| Sold as | Single kit |
Vehicle fitment
Skyjacker gives this set as universal fit, and no specific vehicle is named. Fit depends on the axle tube diameter and spring mounting rather than on a particular model.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the U-bolt diameter and thread length against your axle and mounting plates before you start. Make sure the axle is safely supported during the work.
What’s included
Four U-bolts, eight Nylock tall nuts and eight thick flat washers.






