Select your vehicle

Skyjacker U-Bolt – 916X314X1312

Skyjacker

$15.80In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 4:40 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Replacement U-bolt sold as a single
  • E-coated for corrosion resistance and durability
  • Two nylon insert lock nuts included
  • Part number SKY916X314X1312

Description

Overview

The Skyjacker SKY916X314X1312 is a replacement U-bolt sold as a single. It is E-coated for corrosion resistance and durability, and two nylon insert lock nuts are supplied with it.

The U-bolt range spans square, round and semi-round ends, in lengths from 1.75 to 19 inches. Measure the diameter, thread and length of the clamp you are replacing and match them to this bolt before fitting it.

Key features

  • E-coated for corrosion resistance and durability
  • Sold as a single U-bolt
  • Two nylon insert lock nuts included with SKY916X314X1312
  • Replacement for a spring or axle clamp

Why a coated clamp helps

A U-bolt lives in a harsh corner of the chassis, where spray, grit and salt collect around the axle and spring pack. Coating slows the rust that would otherwise weaken the legs and threads. No finish stops abrasion, so the coating should be inspected at every service.

When the bolt is removed, clean the axle and spring surfaces where the clamp sits. Old rust scale can hold the new U-bolt off-center and cause uneven loading. A wire brush and a degreaser are usually enough for this step.

Keep track of the orientation of the nuts and clamp plate, since a reversed plate can change how the legs bear on the spring. Run the nuts down evenly, then tighten in stages to avoid bending the legs.

  • Clean the clamp seat before fitting
  • Keep the clamp plate orientation
  • Tighten nuts in stages
  • Inspect the coating at each service

Specifications

Brand Skyjacker
Part number SKY916X314X1312
Product type U-bolt
Finish E-coated
Included hardware 2 nylon insert lock nuts
Sold as Single

Vehicle fitment

Confirm fit for your vehicle’s year, model and trim before ordering. Match the bolt to the spring and axle it clamps rather than to a generic label.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Use the lock nuts that come with the SKY916X314X1312 and confirm the bolt seats squarely on the spring or axle before tightening. Follow the torque figure given for your vehicle.

What’s included

One SKY916X314X1312 U-bolt and two nylon insert lock nuts.

Questions & Answers

Does the Skyjacker SKY916X314X1312 fit a particular vehicle?

No specific vehicle is covered by this part. Confirm fit for your vehicle's year, model and trim, and check the diameter, thread and length against the spring and axle before ordering.

Does the SKY916X314X1312 come with nuts?

Yes. This bolt ships with two nylon insert lock nuts. It is sold as a single U-bolt, so buy one for every clamp you are replacing.

What does the E-coat on the SKY916X314X1312 do?

It is E-coated for corrosion resistance and durability. The coating helps slow rust on the threads and bend, which matters on a spring or axle exposed to road grime.

What tools are needed to fit a U-bolt?

A socket set and a torque wrench cover most jobs, along with a wire brush for cleaning. Penetrating oil helps free seized nuts. Check the spring seat before tightening the nuts to the torque figure for your vehicle.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon