Overview
A Skyjacker 58X338X11 U-bolt kit holds an axle to leaf springs using four U-bolts with nuts and washers. Universal fit is listed, so check how your axle and springs measure before you commit to this size.
Measuring before you install
U-bolts clamp the axle to the leaf springs, so their fit depends on the axle tube diameter, the spring pack thickness and the plate or pad they sit on. Measure the axle housing and the spring stack before ordering, and compare those measurements to the kit’s bolt size. A U-bolt that is too tight can crush the axle tube, while one that is too loose can allow the axle to shift under load.
Tighten the nuts evenly in stages and re-check them after the first few drives, since new springs and axle seats settle. Inspect the threads and washers for damage at each service. Replace any nut or U-bolt that shows stretching, rust that has pitted the metal, or thread damage. Use fresh hardware if the old set has been removed more than once, because worn threads hold torque poorly.
- Measure axle tube diameter before ordering
- Check spring pack thickness and mounting plates
- Re-check nut tightness after early drives
- Replace hardware that shows thread damage
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 58X338X11 |
| UPC | 803696108827 |
| Sold as | Single |
Vehicle fitment
No make, model or year is tied to this kit, so the match is left to your axle and spring measurements.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Each kit includes four U-bolts plus matching hardware: eight tall Nylock nuts and eight thick flat washers.






