Select your vehicle

Skyjacker Rear Brake Line, Stainless Steel, Lifted Height of 4 in. to 6 in. – RBL11

Skyjacker

$127.34Usually ships within 5 to 6 days
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 19, 2026 1:30 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear stainless brake line for 1986–1999 Ford F-250 and 1999–2010 F-250 Super Duty
  • Made for 4 inch to 6 inch lifts
  • Rear line only, direct fit

Description

Overview

The Skyjacker RBL11 is a stainless steel rear brake line sold as a rear line only, for the 1986–1999 Ford F-250 and the 1999–2010 Ford F-250 Super Duty. It is made for lifts of 4 inches to 6 inches.

Key features

  • Stainless steel rear line
  • Rear line only
  • Made for 4 inches to 6 inches of lift
  • Direct-fit design

Lift height and line routing

Raising a truck changes the position of the rear axle relative to the frame, and the brake line has to span that new distance. A line that is too short will stress its fittings, while one routed loosely can rub on the frame, the driveshaft or a tire. Stainless steel resists rust better than plain steel, which matters on trucks driven in salt, mud or wet conditions.

Before installation, compare the route of the new line with the old one and confirm the bends clear the axle housing and suspension parts. After installation, check for leaks at each fitting, bleed the brakes as needed and test the pedal before driving on public roads. Wear shows up as chafing at clamps, corrosion at fittings or a soft pedal.

  • Check clearance at the axle and frame
  • Look for chafing at every clamp
  • Test pedal feel before driving

Specifications

Brand Skyjacker
Part number RBL11
Type Stainless steel brake line
Position Rear
Lift height 4 inches to 6 inches
Fitment type Direct fit

Vehicle fitment

The RBL11 fits the 1986–1999 Ford F-250 and the 1999–2010 Ford F-250 Super Duty.

The F-350 and trucks outside those years are not on this list. Skyjacker gives few other details for this part. Confirm your vehicle’s year, model and trim before ordering.

Fitment

VehicleYearsTrims
Ford F-2501986–1999Base, Custom, Eddie Bauer, Lariat, Special, XL, XLT, XLT Lariat
Ford F-250 Super Duty1999–2010Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What trucks does the Skyjacker RBL11 fit?

The RBL11 fits the 1986–1999 Ford F-250 and the 1999–2010 Ford F-250 Super Duty. It is a rear stainless steel line for those trucks.

Is the RBL11 a front or rear line?

It is a rear line only. It is made of stainless steel for lifts of 4 inches to 6 inches, so no front line is included.

Does the RBL11 fit an F-250 Super Duty?

Yes, for the 1999–2010 model years. The RBL11 fits the 1999–2010 Ford F-250 Super Duty as well as the 1986–1999 F-250. It is a stainless steel rear line.

Should brake lines be replaced when a lift is added?

Often yes, if the existing line is stock or worn. A lift changes the distance between frame and axle, so the line can stretch, rub or kink. Inspect the route and fittings during the lift install.

How can I tell a brake line needs replacing?

Look for flaking rust, bulges, cracks, wet spots at fittings, or a soft or sinking brake pedal. Any of these signs means the line should be inspected and replaced by a qualified installer.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon