Overview
The Skyjacker RBL20 is a single rear stainless steel brake line for 1970s and 1980s Chevrolet and GMC four-wheel-drive trucks, Blazers, Suburbans and Jimmys, made for 6 to 8 inches of lift.
The line is braided stainless steel with a heavy-duty off-road brass fitting and an extruded polyurethane outer coating. It is DOT certified and approved by the European T.U.V., and it is street legal in 50 states with a limited lifetime warranty.
Key features
- Rear position, one line per box
- Made for vehicles lifted 6 inches to 8 inches
- Braided stainless steel construction
- Heavy-duty off-road brass fitting
- Outer extruded polyurethane coating
- DOT certified and European T.U.V. approved
- Street legal in 50 states, with a limited lifetime warranty
Brake line replacement tips
A brake line carries fluid under pressure from the master cylinder to the wheel, so any leak or failure at a fitting affects stopping power. Braided stainless lines resist abrasion and expansion better than worn rubber, which is why they are often chosen when a lift changes line routing.
Before replacing a line, plan the bleeding sequence and have the right tools on hand, including a flare wrench and clean brake fluid. Route the new line so it clears the axle, springs and steering components through full travel, and secure it with the factory clips or appropriate brackets.
After installation, check every fitting for leaks, then test the pedal feel before driving. Replace the other rear line at the same time if it shows the same wear, and inspect the flexible sections regularly for chafing, bulges or cracks in the polyurethane coating.
- Check fittings for leaks after bleeding
- Confirm clearance through full suspension travel
- Inspect the coating for chafing
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | RBL20 |
| UPC | 803696155647 |
| Type | Braided stainless steel brake line |
| Position | Rear |
| Quantity | Single |
| Lift height | 6 inches to 8 inches |
| Fittings | Heavy-duty off-road brass |
| Outer coating | Extruded polyurethane |
| Approvals | DOT certified, European T.U.V. approved |
| Fitment type | Direct fit |
| Warranty | Limited lifetime |
Vehicle fitment
It fits the 1973–1986 K10, K20 and K30 pickups, the K10 and K20 Suburbans, the 1975–1986 K5 Blazer, the 1987–1991 V-series Suburbans and pickups, and the 1973–1991 GMC Jimmy, plus the matching GMC K1500, K2500 and K3500 models. Year ranges vary by model, from 1973 up to 1991.
Ford, Dodge and Toyota trucks are not part of this list. Confirm your vehicle’s year, model and trim before ordering.









