Overview
The Skyjacker RBL76 is a single rear stainless steel brake line for the 1978–1979 Ford Bronco, the 1965–1976 F-100 and the 1977–1979 F-150, made for 3 to 9 inches of lift.
The line is braided stainless steel with a heavy-duty off-road brass fitting and an extruded polyurethane coating. It is DOT certified and European T.U.V. approved.
Key features
- Rear line, one per box
- For lifts of 3 inches to 9 inches
- Braided stainless steel
- Polyurethane outer coating
- Off-road brass fitting
- DOT certified, T.U.V. approved
- Limited lifetime warranty
Older Ford trucks and lift
Trucks from the late 1970s and mid-1960s often have original brake hardware that has seen decades of heat, moisture and road salt. A new flexible line is only one part of a safe rear brake system, so the drums or hardware, the wheel cylinders and the fluid should be inspected before the line is fitted. Old fluid absorbs water and can reduce braking performance.
Measure the new line’s route against the lifted position of the axle and keep it away from the exhaust, the frame edges and the spring hangers. Once installed, bleed the system thoroughly and test the pedal with the engine running before driving on the road.
- Inspect drums or hardware before fitting
- Replace old brake fluid during the job
- Test pedal firmness before driving
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | RBL76 |
| UPC | 80369615587 |
| Type | Braided stainless steel brake line |
| Position | Rear |
| Quantity | Single |
| Lift height | 3 inches to 9 inches |
| Fittings | Heavy-duty off-road brass |
| Outer coating | Extruded polyurethane |
| Approvals | DOT certified, European T.U.V. approved |
| Fitment type | Direct fit |
| Warranty | Limited lifetime |
Vehicle fitment
It is a direct fit for the 1978–1979 Ford Bronco, the 1965–1976 Ford F-100 and the 1977–1979 Ford F-150.
The 1980–1996 Bronco and F-150 are not on this list. Confirm your vehicle’s year, model and trim before ordering.









