Overview
The Skyjacker FBL78 is a single front stainless steel brake line for the 1978–1979 Ford Bronco, the 1976 F-100 and the 1977–1979 F-150, made for 3 to 9 inches of lift.
It is built from braided stainless steel with a heavy-duty off-road brass fitting and an extruded polyurethane outer coating. It is DOT certified and approved by the European T.U.V.
Key features
- Front position, one line
- Lift range of 3 inches to 9 inches
- Braided stainless steel
- Outer polyurethane coating, extruded
- Heavy-duty brass fitting
- DOT certified, T.U.V. approved
- Limited lifetime warranty
Lift height and brake lines
Lift height changes the distance between the frame and the axle, which stretches the brake line on the front and can pull it tight at full droop. A line sized for a range of lift helps keep it from being stretched at one end and slack at the other. Route the line so it clears the axle housing, the frame and the suspension arms.
On an older truck of this era, check the rest of the brake system at the same time, including the hard lines, flex hoses and caliper slides. Replacing the front line alone may not solve a soft pedal caused by an aging hose or old fluid.
- Check hard lines and flex hoses
- Confirm clearance at full droop
- Inspect caliper slides and pads
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | FBL78 |
| UPC | 803696131368 |
| Type | Braided stainless steel brake line |
| Position | Front |
| Quantity | Single |
| Lift height | 3 inches to 9 inches |
| Fittings | Heavy-duty off-road brass |
| Outer coating | Extruded polyurethane |
| Approvals | DOT certified, European T.U.V. approved |
| Fitment type | Direct fit |
| Warranty | Limited lifetime |
Vehicle fitment
It fits the 1978–1979 Ford Bronco, the 1976 Ford F-100 and the 1977–1979 Ford F-150.
The 1980–1996 Bronco and F-150 are not on this list. Confirm your vehicle’s year, model and trim before ordering.









