Overview
The Skyjacker RBL80 is a single rear stainless steel brake line for the 1980–1996 Ford Bronco and the 1980–1996 Ford F-150, made for 4 to 8 inches of lift.
It is made from braided stainless steel with a heavy-duty off-road brass fitting and an extruded polyurethane outer coating. The line is DOT certified and carries European T.U.V. approval.
Key features
- Rear line, supplied singly
- Made for 4 inch to 8 inch lifts
- Braided stainless steel
- Extruded polyurethane coating
- Heavy-duty brass fitting
- DOT certified and T.U.V. approved
- Limited lifetime warranty
Lift height and line length
Line length matters more as lift height increases. At 4 inches or more, the rear axle sits farther from the frame, so the stock line is stretched at full droop and can be pinched at full compression. A purpose-built braided line gives the extra length and keeps its path controlled through the travel the lift creates.
On a lifted Bronco or F-150, check the front and rear lines together, because flex hoses at the calipers often wear on a similar schedule. Look for rubbing against the frame, leaf springs and tires, and confirm the line clears the body at full steering lock. Re-check clamps after the first few drives.
- Check line clearance at full lock
- Inspect for rubbing on springs and frame
- Re-check clamps after early drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | RBL80 |
| UPC | 803696155906 |
| Type | Braided stainless steel brake line |
| Position | Rear |
| Quantity | Single |
| Lift height | 4 inches to 8 inches |
| Fittings | Heavy-duty off-road brass |
| Outer coating | Extruded polyurethane |
| Approvals | DOT certified, European T.U.V. approved |
| Fitment type | Direct fit |
| Warranty | Limited lifetime |
Vehicle fitment
It fits the 1980–1996 Ford Bronco and the 1980–1996 Ford F-150.
The 1978–1979 Bronco and F-150 and all F-250 and F-350 trucks are not on this list. Confirm your vehicle’s year, model and trim before ordering.









