Overview
The Skyjacker FBL90 is a pair of front stainless steel brake lines for the 1980–1989 Ford F-250 and F-350, matched to 4 to 6 inches of lift.
The lines use braided stainless steel, heavy-duty off-road brass fittings and an extruded polyurethane coating. Skyjacker lists them as DOT certified and approved by the European T.U.V.
Key features
- Pair of front lines
- Matched to 4 inch to 6 inch lifts
- Braided stainless construction
- Polyurethane outer coating
- Brass fittings made for off-road use
- DOT certified and T.U.V. approved
- Limited lifetime warranty
Care and maintenance
Brake lines need little routine work, but they should be looked at during every brake service. Wipe the hoses clean, check for damage at the clips and fittings, and make sure the lines are still secured where they were originally routed. Mud and road salt can hide corrosion, so a quick cleaning helps reveal any early problems.
Keep the lines away from heat sources such as exhaust parts and clean the fittings before reconnecting them. Use fresh brake fluid when the system is opened, and bleed the air out completely. A pedal that feels spongy after service usually points to air in the system or a fitting that was not tightened correctly.
- Inspect hoses and clips at every brake service
- Keep lines away from exhaust heat
- Use fresh fluid and bleed completely
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | FBL90 |
| UPC | 803696131498 |
| Type | Braided stainless steel brake lines |
| Position | Front |
| Quantity | Pair |
| Lift height | 4 inches to 6 inches |
| Fittings | Heavy-duty off-road brass |
| Outer coating | Extruded polyurethane |
| Approvals | DOT certified, European T.U.V. approved |
| Fitment type | Direct fit |
| Warranty | Limited lifetime |
Vehicle fitment
The FBL90 fits the 1980–1989 Ford F-250 and F-350.
Ford trucks built from 1990 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.









