Overview
The Skyjacker WS325 is a 4 Degree shim for wide springs that sit on top of the axle. It is a universal fit shim, so it is not tied to one vehicle. It is used for alignment and final settings when the correct angle is needed.
Using a degree shim
A degree shim is a tapered spacer that changes the angle of the axle or spring seat, which in turn shifts the alignment reading. Shims are most often used when the axle has been moved or the vehicle sits at a different height than intended. Because shims change geometry, they affect caster and camber, so the shim angle should be chosen with a full alignment in mind.
Check the spring pack and axle seat for wear, cracks, or loose U-bolts before fitting. Make sure the shim sits flat and that all fasteners are tightened in the correct sequence. After driving, recheck the alignment, because a shim can settle or shift under load.
- Measure the current angle before choosing a shim
- Check the axle seat for wear
- Confirm the shim orientation before tightening
- Recheck alignment after the first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | WS325 |
| UPC | 803696167053 |
| Degree | 4 Degree |
| Center pins | Without center pins |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
The WS325 is a universal fit part, so it is not sized for a named vehicle. Suitability depends on your spring and axle arrangement, so measure that setup before ordering. Check the year, model and trim of your vehicle before buying.







