Overview
The Pro Comp degree shim 99-400, part number 99-400, is a 4 degree alloy aluminum shim for leaf spring axles. Pro Comp Suspension designs it to help align the driveline angles when lifted springs are used, since a spring lift tilts the axle and changes the angle of the driveshaft.
The shim is listed without center pins. The UPC for this part is 614901133417.
Key features
- 4 degree angle
- Alloy aluminum construction
- Without center pins
- Designed for lifted leaf spring setups
Driveline Angle Basics
A driveshaft works best when its two ends sit at similar angles. Lifting with leaf springs tilts the axle, which changes the angle at the pinion and can bring on vibration at speed. Shims are one way to correct that, but the right fix depends on how the driveline is set up and what else has changed on the truck.
Before fitting any shim, check the transfer case output and the pinion angle, and look at U-joint wear. A worn joint can mimic the symptoms of a bad angle, so the joints should be inspected first. Re-measure after the work to confirm the driveline is closer to parallel.
- Look for vibration that changes with speed
- Check U-joints for play or wear
- Recheck angles after any suspension change
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 99-400 |
| UPC | 614901133417 |
| Degree | 4 degree |
| Center pins | Without center pins |
| Material | Alloy aluminum |
Vehicle fitment
No vehicle is named for this shim. The correct angle depends on the lift and the existing driveline, so measure the driveline angle before choosing a 4 degree shim.
Installation notes
Shims sit between the leaf spring and the axle, so the axle must be removed from the spring pack or the spring pack loosened before the shim is placed. Confirm the driveline angle after installation.
What’s included
The shim is sold alone, without center pins.












