Overview
The Skyjacker 1043H is a camber/caster shim for alignment work, adjusting across a 0 – 2 Deg. range. It helps with alignment aids and final settings. Camber is the inward or outward tilt of the wheel, and caster is the forward or rearward tilt of the steering axis, so this shim targets those two angles.
Alignment basics
Camber and caster are set during a wheel alignment, and a shim lets the technician shift one of those angles when the factory adjustment runs out of travel. Camber affects how the tire sits on the road and how it wears across the tread. Caster affects steering return and straight-line stability. Changing one angle often changes the other, so adjust them with a full alignment rather than in isolation.
Before using a shim, measure the current angles on the alignment rack and note any wear in the control arm bushings, ball joints, and tie rod ends. Worn parts can make a shim seem ineffective. After the setting is made, recheck the alignment after the first few drives and confirm the fasteners remain at the correct torque.
- Measure camber and caster before changing anything
- Inspect control arm bushings and ball joints
- Recheck alignment after the first drives
- Tighten fasteners to the torque for your vehicle
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 1043H |
| UPC | 803696100326 |
| Adjustment range | 0 – 2 Deg. |
Vehicle fitment
No vehicle is confirmed for the 1043H. Compare the shim against your own axle and suspension before choosing it. Confirm your vehicle’s year, model and trim before ordering.
What’s included
No contents beyond the camber/caster shim itself are described.






