Overview
The Skyjacker 1029H is a front camber/caster shim with a 0 to 2 degree range. It fits 1989–1990 Ford Bronco II, 1991–1994 Ford Explorer, 1987–1996 Ford F-150, 1988–1997 Ford Ranger and 1992–1994 Mazda Navajo models.
A camber/caster shim lets a lifted or modified front end return toward the alignment settings the vehicle needs. The shim works as an alignment aid that offers a broad fit and helps with final settings.
The 0 to 2 degree range makes it the smaller of two Skyjacker shim sizes, suited to modest changes. Fitment spans several Ford pickups and SUVs and one Mazda, which reflects how widely this front suspension design was used.
Key features
- Camber/caster shim
- 0 to 2 degree adjustment range
- Front position
- Alignment aid for a broad fit
- Fits Bronco II, Explorer, F-150, Ranger and Navajo models
- Direct-fit
Alignment after changing the shim
Front camber and caster set how the tire sits on the road and how the steering returns to center. When a front end is raised or altered, those angles can drift outside the range the vehicle was built to use, which can cause uneven tire wear, pull under braking and a loose feel on the highway. A shim adjusts the caster or camber angle within a limited range, so it is a tool for bringing settings back, not for making large changes.
Shims are usually installed with the alignment in mind. Install the shim, then have a shop set the alignment, because the first settings are only a starting point. Check the shim position and bolts for tightness after the first few drives, and recheck the alignment if tire wear shows up early.
- Have the front alignment set after installing the shim
- Look for uneven wear across the tread
- Check bolts after the first few drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 1029H |
| UPC | 803696100265 |
| Part type | Camber/caster shim |
| Adjustment range | 0 – 2 degrees |
| Position | Front |
| Fitment type | Direct fit |
| Category | Axle parts, leaf spring axle shim |
Vehicle fitment
The shim fits these vehicles, with the trims shown:
- 1989–1990 Ford Bronco II (Eddie Bauer, XL, XL Sport, XLT, XLT Plus)
- 1991–1994 Ford Explorer (Eddie Bauer, Limited, XL, XLT)
- 1991–1994 Ford Explorer Sport
- 1987–1996 Ford F-150 (Custom, Eddie Bauer, Special, XL, XLT, XLT Lariat)
- 1988–1997 Ford Ranger (Custom, GT, S, S Plus, STX, Splash, Sport, XL, XL Sport, XLT)
- 1992–1994 Mazda Navajo (DX, LX)
The list covers specific Ford and Mazda years only. The Bronco and F-350 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shim works as an alignment aid for final settings. A wheel alignment is normally needed after changing the shim.







