Overview
The Pro Comp Degree Shim, part number 99-250B, is a tapered leaf spring axle shim that corrects driveshaft angle. It is rated at 2.5 degrees and sold as a pair, and the taper is designed to improve driveshaft angle.
The shim is tapered, so the degree of correction is built into the part rather than set during installation. Driveshaft angle is a concern on lifted vehicles, which is why a correcting shim is used.
Key features
- Tapered design to improve driveshaft angle
- 2.5-degree correction
- Sold as a pair
- No center pins included
Measuring driveshaft angle
Driveshaft angle is the difference between the transmission output and the pinion angle, and it matters most when a lift raises the rear axle. A rear axle that rotates under load changes that relationship further, so the measurement should be taken with the vehicle at its normal ride height and loaded as it is usually driven. Small errors add up, causing vibration at highway speeds and wear on the U-joints.
Leaf spring axles are typically checked with a digital angle finder placed on the pinion flange and the transmission or transfer case output. Compare the two readings, then decide whether a shim, a different spring pack or another correction method best fits the angle you measured. A shim works best when the difference is close to what it corrects.
After installation, recheck the angle, look at the U-joint caps for wear, and inspect the axle pinion and spring pins at the next service. Center pins are a separate consideration, so confirm whether your spring pack already has them before assembly.
- Measure the angle with the vehicle at ride height
- Recheck after any change in spring or load
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 99-250B |
| UPC | 614901170122 |
| Degree | 2.5 degrees |
| Center pins | None |
| Quantity | Pair |
Vehicle fitment
The shim is designed as a universal fit, but driveshaft angle depends on the specific rear axle, spring and lift. Measure your current angle before choosing a 2.5-degree shim.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A pair of 2.5-degree tapered shims.
Not included: Center pins.










